Unit of competency Outline

Date retreived
22/07/2026 8:58 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Operate and monitor system equipment

Operate and monitor system equipment

Unit of competency
National Code
UEPOPS441
State Code
OAG30
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
31/10/2018
View on TGA
State Implementation and Classification
Approved Date
15/05/2019
Field of Education
030717 - Plant And Machine Operations
Original Release Date
15/05/2019
Nominal Hours
27
Description
This unit involves the skills and knowledge required to operate, monitor and control High Voltage (H.V.) apparatus on the system via SCADA control.Supervisory Control and Data Acquisition(SCADA) is acontrol systemthat uses computers, networked data communications andgraphic interfaces.It uses other peripheral devices such asprogrammable logic controllersand discreteproportional integral derivative controllers to interface with plant, equipment or machinery.Competency in this unit requires the ability to plan work, operate system equipment, monitor system equipment, analyse system equipment faults and complete all documentation. Individuals will, in general, work under supervision, in a power generation facility as an operator. Power generation plant operators are typically trained and authorised to isolate, prepare plant and issue permits to work.No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit may require a licence or training permit to practice in the workplace where work is carried out on gas and electrical installations. Additional conditions may apply under state and territory legislative and regulatory licensing requirements.
Notes
Elements and Performance Criteria
1 Plan and prepare work
  • 1.1 Safety issues related to operating and monitoring system and/or network High Voltage (H.V.) apparatus through Supervisory Control and Data Acquisition (SCADA) is identified, in accordance with workplace procedures and Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations and legislative requirements
  • 1.2 System and/or network requirements for operating, monitoring and controlling H.V. apparatus through SCADA are identified from appropriate personnel and documentation, in accordance with workplace procedures
  • 1.3 System and/or network and associated H.V. apparatus and SCADA equipment operational prerequisites are identified and established, in accordance with workplace and manufacturers' procedures
  • 1.4 Sequence for recommissioning of system and/or network H.V. apparatus and equipment through SCADA is identified and determined, in accordance with workplace procedures
2 Operate system/network equipment
  • 2.1 System and/or network equipment and SCADA programs are operated, in accordance with workplace procedures
  • 2.2 Load shedding requirements are identified, selected and monitored, in accordance with workplace procedures, during equipment operations to ensure system integrity
  • 2.3 System and/or network operations are completed in consultation with appropriate personnel
3 Monitor system/network equipment
  • 3.1 Voltage and current requirements are assessed, evaluated and controlled to maintain system/network equipment integrity and stability, in accordance with workplace procedures
  • 3.2 System and/or network equipment is monitored for normal operations or to detect deviations, in accordance with workplace procedures
  • 3.3 Corrective actions to rectify system and/or network abnormalities are taken, in accordance with workplace procedures
  • 3.4 Appropriate personnel are notified when system and/or network equipment defects or abnormal operating conditions are detected, in accordance with workplace procedures
4 Analyse system/networkequipment faults
  • 4.1 Cause of system equipment operating faults are identified by analysing technical and operational information, in accordance with workplace procedures
  • 4.2 Operation of protection system is identified and assessed, in accordance with workplace procedures, to evaluate nature and cause of fault conditions
  • 4.3 Communication is established with key stakeholders, in accordance with workplace procedures, to identify nature and source of equipment system fault or failure
  • 4.4 Corrective action is taken, in accordance with workplace procedures
  • 4.5 Network and/or system integrity and personnel safety are maintained, in accordance with workplace procedures, and in consultation with appropriate personnel technical and operational documentation including contingency plans
5 Complete documentation
  • 5.1 Equipment problems, movements, and status are reported, in accordance with workplace procedures
  • 5.2 Documentation is updated, in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WE420 UEPOPS441B Operate and monitor system equipment Unit of competency
Replaced By
State Code National Code Title Type
ODX82 UEPOPS108 Operate and monitor system equipment Unit of competency