Unit of competency Outline

Date retreived
22/07/2026 8:07 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Wind electrical coils

Wind electrical coils

Unit of competency
National Code
UEEEL0074
State Code
OCA57
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
05/10/2020
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
12/07/2021
Nominal Hours
36
Description
This unit involves the skills and knowledge required to set up coil former and winding machine/s to wind electrical coils for static and rotating electrical machines.It includes working safely, using hand and power tools, following technical instructions and set procedures, recording work activities and winding electrical coils.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare to wind electrical coils
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified and understood
  • 1.2 Existing WHS/OHS risk control measures for work preparation are followed
  • 1.3 Work instructions are identified, obtained and applied
  • 1.4 Advice is sought from the work supervisor to ensure work is coordinated effectively with others
  • 1.5 Materials required for work are obtained in accordance with work instructions and workplace procedures
  • 1.6 Tools, equipment and testing devices needed to carry out electrical work are obtained and checked for correct operation and safety
2 Wind electrical coils
  • 2.1 Existing WHS/OHS risk control measures for winding electrical coils work are followed
  • 2.2 Winding machines are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
  • 2.3 Winding wire and insulation are selected in accordance with work instructions and workplace procedures
  • 2.4 Winding formers and machine are set up in accordance with workplace instructions
  • 2.5 Unplanned situations are responded to in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
  • 2.6 Routine quality checks are conducted to ensure electrical coils are correctly wound with correct wire, number of turns and shape in accordance with work instructions
  • 2.7 Coil work is completed within timeframe, environment and workplace conditions
3 Complete workplace report
  • 3.1 WHS/OHS workplace completion risk control measures are followed
  • 3.2 Workplace report, forms/data sheets are completed accurately in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WC494 UEENEEG150A Wind electrical coils Unit of competency