Unit of competency Outline

Date retreived
22/07/2026 6:49 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Set up, operate and maintain computer numerically controlled (CNC) cutting machines

Set up, operate and maintain computer numerically controlled (CNC) cutting machines

Unit of competency
National Code
MSFUP3014
State Code
WI680
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
19/06/2014
Nominal Hours
80
Description
This unit of competency covers setting up, operating, adjusting, monitoring and maintaining CNC machines used in the cutting of upholstery materials.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work
  • 1.1 Work instructions are used to determine job requirements including design, quality, materials, equipment and quantities
  • 1.2 Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
  • 1.3 Appropriate CNC cutting program and settings are determined
  • 1.4 Material for cutting is selected and inspected for appropriate quality
  • 1.5 Machines, cutting tools and jigs are checked for safe and effective operation
  • 1.6 Procedures are determined for minimising waste material and for maximising energy efficiency while completing the job
  • 1.7 Safety equipment, including emergency stops, gauges, guards and controls are checked
2 Set up machines
  • 2.1 CNC cutting program is set to job requirements
  • 2.2 Machine settings and adjustments are made in accordance with job requirements and machine and tool manufacturer instructions
  • 2.3 Trial runs are conducted to check machine operation and quality of finished work
  • 2.4 Final adjustments are made to CNC programs and equipment according to workplace procedures
3 Operate CNC cutting machine
  • 3.1 Machines are operated and monitored to ensure product quality and output
  • 3.2 Waste quantities are checked and minimised
  • 3.3 Problems with the required work, including machine operation/production, are identified and reported in accordance with workplace procedures
  • 3.4 Any authorised changes in working procedures are followed
  • 3.5 Daily routine lubrication and adjustments for the equipment are completed
4 Complete work and maintain equipment
  • 4.1 Items that do not meet quality requirements are repaired, recycled or discarded according to workplace procedures
  • 4.2 Material that can be re-used is collected and stored
  • 4.3 Waste and scrap are removed following workplace procedures
  • 4.4 Equipment and work area are cleaned and inspected for serviceable condition in accordance with workplace procedures
  • 4.5 Unserviceable equipment is tagged and faults identified in accordance with workplace procedures
  • 4.6 Operator maintenance is performed on equipment and tooling is maintained in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
W8824 LMFUP3014B Set up, operate and maintain CNC cutting machines Unit of competency
State Code National Code Title Type
J735 MSF30713 Certificate III in Upholstery Qualification