Unit of competency Outline
Date retreived
22/07/2026 3:59 PM AWST
22/07/2026 3:59 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Monitor environmental and sustainability best practice in the marine mechanical industry
Monitor environmental and sustainability best practice in the marine mechanical industry
Unit of competency
National Code
AURREA3002
AURREA3002
State Code
WF310
WF310
TGA Status
Deleted
Deleted
DTWD Status
Deleted
Deleted
State Implementation and Classification
Approved Date
16/07/2013
Field of Education
050999 - Environmental Studies, N.e.c.
Original Release Date
16/07/2013
Nominal Hours
25
Description
This unit describes the performance outcomes required to monitor environmental regulations and sustainability best practice whilst undertaking the repair, maintenance and installation of marine craft engines and or components and electrical systems in a manner that ensures the protection of the environment in the marine repair industry.Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Apply and monitor environment regulations
- 1.1. Reasons for ethical environmental practice in an marine workplace are identified
- 1.2. Environmental responsibilities and penalties for individual breaches of legislation and regulations are identified
- 1.3. Documents and procedures relevant to environmental safety and hazards are applied
- 1.4. Safety equipment and other material necessary to support environmentally sound practices are identified and sourced
2. Monitor and avoid contamination to water systems and marine environments
- 2.1. Wastewater or contaminants are contained to restrict entry to water systems, foreshores or marine environments
- 2.2. Vessel and component maintenance, service and repair is undertaken in an environmentally responsible manner to avoid hazards to water systems, foreshores and marine environments
- 2.3. Engine and component cleaning is carried out in an area that is bunded or graded to a collection pit
- 2.4. All preparation areas, in particular anti-foulant paint preparation, is bunded and under cover to ensure accidental spillage cannot escape into water systems, foreshores and marine environments
- 2.5. All components containing environmentally hazardous material are stored undercover in a sealed and bunded area
- 2.6. Liquid wastes are drained into appropriate storage or recycling containers
- 2.7. Bilge water is disposed of in an appropriate manner
- 2.8. Spill kit is located and used as needed and disposed of as controlled waste by a licensed contractor to prevent water, foreshore pollution and damage to the marine environment
- 2.9. Spills are cleaned up immediately and the workplace is kept clean to prevent unintentional pollution to water, foreshores and the marine environment
3. Monitor and avoid hazards to air quality
- 3.1. Welding, soldering and thermal cutting is conducted in a well-ventilated area
- 3.2. Hazards of airborne particles are monitored, minimised and contained
- 3.3. Hazards of gases are identified, monitored and contained
- 3.4. Clean-up of guns and general tools and equipment is conducted in an environmentally safe manner
4. Monitor and avoid noise hazards
- 4.1. Hazardous noise activities are monitored, prevented, reduced and contained
- 4.2. Hazardous noise activities are carried out within approved operating hours and regulations
5. Monitor and apply sustainability best practice
- 5.1. Sustainability best practice is monitored and applied to minimise waste and potential damage to the environment according to workplace policies and procedures
- 5.2. Methods to reduce resource consumption (water, electricity, fossil fuels, chemicals) are monitored and applied
- 5.3. Environmental damage and breaches of environmental regulations are monitored and recorded
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Ethical environmental practice may include:
compliance with legislative obligations
hazardous materials handling best practice applications
organisation insurance requirements
discretion, judgement and problem-solving skills in undertaking environmentally sound work practices
Documents and procedures may include:
material safety data sheets (MSDS)
hazardous substances register
environmental legislation
health regulations
site environmental policy
workplace environmental procedures and safety instructions
dangerous goods code safe operating procedures
Hazards may include:
toxic fumes and substances
flammable materials and fire hazards
spillages
waste and debris especially on floors, ladders, trolleys
electricity and water
toxic substances
damaged packing material or containers
broken or damaged equipment
unsafe lifting practices
Safety equipment and other material may include:
personal protective equipment (PPE) including:
eye protection
hearing protection
gloves
other suitable protective clothing
safety footwear
spill kit
absorbent materials
drip and catchment trays
waste bags
waste segregation systems
Contaminants may include:
solid or liquid wastes
oil, fuel and grease
hydrocarbon based degreasing agents and solvents
acids
alkaline wastes
paint, lacquer, varnish
glues and adhesive compounds
household chemicals and pesticides
Sustainability best practice may include:
recycling waste
energy conservation practices
natural resources (water, etc.) conservation practices
reusing
environmental (green) purchasing practices
noise minimisation
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Ethical environmental practice may include:
compliance with legislative obligations
hazardous materials handling best practice applications
organisation insurance requirements
discretion, judgement and problem-solving skills in undertaking environmentally sound work practices
Documents and procedures may include:
material safety data sheets (MSDS)
hazardous substances register
environmental legislation
health regulations
site environmental policy
workplace environmental procedures and safety instructions
dangerous goods code safe operating procedures
Hazards may include:
toxic fumes and substances
flammable materials and fire hazards
spillages
waste and debris especially on floors, ladders, trolleys
electricity and water
toxic substances
damaged packing material or containers
broken or damaged equipment
unsafe lifting practices
Safety equipment and other material may include:
personal protective equipment (PPE) including:
eye protection
hearing protection
gloves
other suitable protective clothing
safety footwear
spill kit
absorbent materials
drip and catchment trays
waste bags
waste segregation systems
Contaminants may include:
solid or liquid wastes
oil, fuel and grease
hydrocarbon based degreasing agents and solvents
acids
alkaline wastes
paint, lacquer, varnish
glues and adhesive compounds
household chemicals and pesticides
Sustainability best practice may include:
recycling waste
energy conservation practices
natural resources (water, etc.) conservation practices
reusing
environmental (green) purchasing practices
noise minimisation
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to workplace operations and satisfy all of the requirements of the performance criteria and required skills and knowledge.
A person who demonstrates competency in this unit must be able to:
monitor and apply environmental regulations and sustainability best practice as they apply in an marine mechanical workplace
identify materials used in an marine mechanical workplace and assess their potential environmental impact
monitor and record environmental damage and breaches to environmental regulations.
Context of and specific resources for assessment
Competency is to be assessed in the workplace or a simulated workplace environment that accurately reflects performance in a real workplace setting.
Assessment is to occur:
using standard workplace practices and procedures
following safety requirements
applying environmental constraints.
Assessment is to comply with relevant:
regulatory requirements
Australian standards
industry codes of practice.
The following resources must be made available for the assessment of this unit:
access to environmental legislation, regulations and best practice models
access to an marine workplace or simulated environment that accurately reflects marine workshop working conditions
access to workplace documents and reference images
access to personal protective and environmental protection equipment of the type intended to be used in response to an environmental incident or accident.
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of this Training Package.
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with the application of required skills and knowledge.
Assessment methods must be by direct observation of tasks and include questioning on required skills and knowledge to ensure correct interpretation and application.
Competence in this unit may be assessed in conjunction with other units which together form part of a holistic work role.
Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate the needs of diverse clients.
Assessment processes and techniques must be culturally sensitive and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to workplace operations and satisfy all of the requirements of the performance criteria and required skills and knowledge.
A person who demonstrates competency in this unit must be able to:
monitor and apply environmental regulations and sustainability best practice as they apply in an marine mechanical workplace
identify materials used in an marine mechanical workplace and assess their potential environmental impact
monitor and record environmental damage and breaches to environmental regulations.
Context of and specific resources for assessment
Competency is to be assessed in the workplace or a simulated workplace environment that accurately reflects performance in a real workplace setting.
Assessment is to occur:
using standard workplace practices and procedures
following safety requirements
applying environmental constraints.
Assessment is to comply with relevant:
regulatory requirements
Australian standards
industry codes of practice.
The following resources must be made available for the assessment of this unit:
access to environmental legislation, regulations and best practice models
access to an marine workplace or simulated environment that accurately reflects marine workshop working conditions
access to workplace documents and reference images
access to personal protective and environmental protection equipment of the type intended to be used in response to an environmental incident or accident.
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of this Training Package.
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with the application of required skills and knowledge.
Assessment methods must be by direct observation of tasks and include questioning on required skills and knowledge to ensure correct interpretation and application.
Competence in this unit may be assessed in conjunction with other units which together form part of a holistic work role.
Where applicable, reasonable adjustment must be made to work environments and training situations to accommodate the needs of diverse clients.
Assessment processes and techniques must be culturally sensitive and appropriate to the language, literacy and numeracy capacity of the candidate and the work being performed.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W2956 | AURR371181A | Implement and monitor environmental regulations in the marine repair industry | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| J393 | AUR30512 | Certificate III in Marine Mechanical Technology | Qualification |