Unit of competency Outline

Date retreived
23/07/2026 3:33 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Service and repair recreational vehicle chassis, suspensions and braking systems

Service and repair recreational vehicle chassis, suspensions and braking systems

Unit of competency
National Code
MSMRV389
State Code
OFD40
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
03/02/2023
View on TGA
State Implementation and Classification
Approved Date
24/05/2023
Field of Education
030503 - Vehicle Mechanics
Original Release Date
24/05/2023
Nominal Hours
45
Description
This unit describes the skills and knowledge required to service and repair the chassis, suspensions and braking systems of recreational vehicles including motorhomes, campervans, caravans and fifth-wheelers.‘Service/repair’ includes servicing (such as conducting a routine seasonal or scheduled service) or repairing (such as accident repair, maintenance, repair or replacement of worn parts, breakdown, the identification and repair of faults, the removal and replacement of items or the installation of new items) or both.The unit applies to a person working in a recreational vehicle service and repair facility who undertakes routine tasks according to work instructions, plans/specifications and procedures and uses discretion and judgement in selecting equipment, services or contingency measures. They work with a high degree of self-direction and limited supervision. They apply known solutions to routine problems and report non-routine problems according to procedures. They are responsible for their output and have limited responsibility for the output of others.The person should achieve suitable welding competencies before or while undertaking this unit.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare to assess chassis, suspensions and braking systems
  • 1.1 Identify the authorised scope of service/repair works from job instructions, service schedules and insurance requirements
  • 1.2 Select and check all required tools and equipment are ready to use
  • 1.3 Identify hazards and hazard controls and check the hazard controls are in place and operating
  • 1.4 Check the recreational vehicle and work area are ready to assess the system
2. Assess and confirm the scope of work
  • 2.1 Inspect the underbody, wheels and tyres to identify wear/damage and unsafe items, and determine any service/repair work required
  • 2.2 Check braking mechanisms for appropriate operation and wear
  • 2.3 Test electrical braking systems to ensure correct operation
  • 2.4 Document any needed repair work beyond the scope of the job instructions
  • 2.5 Determine and communicate to a supervisor the extent of labour, materials and suppliers’ services required for out-of-scope repairs
  • 2.6 Provide further information and advice to support negotiation with external parties about the out-of-scope repairs
  • 2.7 Confirm the job instructions and seek approval for the final scope of works
3. Service/repair chassis
  • 3.1 Follow procedures for required work notices and communication with authorities
  • 3.2 Organise the supply of items required by the scope of works, and check they meet quality requirements and are ready for installation
  • 3.3 Measure the chassis for squareness
  • 3.4 Prepare, cut, assemble and weld chassis sections
  • 3.5 Inspect recent and existing welds for soundness, and clean and apply coatings to chassis sections according to manufacturer’s instructions
4. Service/repair suspensions and braking systems
  • 4.1 Follow procedures for required work notices and communication with authorities
  • 4.2 Organise the supply of items required by the scope of works, and check they meet quality requirements and are ready for installation
  • 4.3 Complete service/repair tasks according to manufacturer’s specifications, service manuals, regulations and standards
5. Complete service/repair according to workplace procedures
  • 5.1 Clean up the recreational vehicle in readiness for the next task
  • 5.2 Clean up the work area, identify items for recycling and dispose of waste
  • 5.3 Identify, tag and report any damage to equipment and tools
  • 5.4 Check, clean and do routine maintenance on equipment and tools and store them and unused materials
  • 5.5 Complete task outcome documentation
No information
No information
No information
State Code National Code Title Type
BJC7 MSM31022 Certificate III in Recreational Vehicle Service and Repair Qualification