Unit of competency Outline

Date retreived
22/07/2026 10:40 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct patching operations

Conduct patching operations

Unit of competency
National Code
RIICBS310D
State Code
WH063
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
29/05/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
29/05/2014
Nominal Hours
52
Description
This unit describes a participant’s skills and knowledge required to conduct patching operations in Civil Construction. This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare for patching operations
  • 1.1 Access, interpret and apply patching operations documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures
  • 1.4 Select and wear personal protective equipment appropriate for work activities
  • 1.5 Obtain, interpret and implement traffic management signage requirements
  • 1.6 Select and check for faults plant, tools and equipment to carry out tasks
  • 1.7 Confirm and apply environmental protection and safety requirements
  • 1.8 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Set up patching truck
  • 2.1 Carry out pre-operational checks
  • 2.2 Check tank for prevention of contamination
  • 2.3 Fill tank with the required materials to perform repair operations
  • 2.4 Determine standard mix of emulsion ready for application to surfaces
3. Repair damaged surfaces
  • 3.1 Carry out start-up, park, shutdown and secure equipment procedures
  • 3.2 Drive and operate truck
  • 3.3 Position truck according to the range of the boom
  • 3.4 Position boom manually or automatically over the damaged surface to be repaired
  • 3.5 Blow area to be repaired free of dust and debris
  • 3.6 Apply patching material to the defective area under the pressure of compressed air
  • 3.7 Measure, calculate and record material quantities and additives for each site
  • 3.8 Conduct, control and monitor patching work and ensure that materials are placed to specification
4. Carry out operator maintenance
  • 4.1 Prepare machine for maintenance
  • 4.2 Conduct inspection and fault finding
  • 4.3 Carry out scheduled maintenance tasks
  • 4.4 Process written maintenance records
5. Clean up
  • 5.1 Clear work area and dispose of or recycle materials
  • 5.2 Clean, check, maintain and store plant, tools and equipment
  • 5.3 Carry out housekeeping requirements
No information
No information
Replaces
State Code National Code Title Type
WB026 RIICBS310A Conduct patching operations Unit of competency
Replaced By
State Code National Code Title Type
OBN05 RIICBS310E Conduct patching operations Unit of competency