Elements and Performance Criteria

This competency unit includes the use of shuttle, swing and carousel type machines.

This competency applies to all rotomoulding systems including fixed spindle, single spindle, multiple spindle and shuttle. It also includes the operation of all relevant ancillary equipment.

This unit of competency relates to primary equipment only and if the role includes the operation of major stand alone ancillary equipment then PMBPROD206A - Operate ancillary equipment should also be chosen. If the role includes finishing, then PMBFIN201B - Finish products and components should be chosen.

Procedures means all relevant workplace procedures, work instructions, temporary instructions and relevant industry and government codes and standards.

This competency includes equipment and tools such as:
hand tools
material loading equipment used for loading of raw materials
relevant personal protective equipment.

Typical hazards include:
spills
noise, light, energy sources
humidity, air temperature, radiant heat, hot moulds
hazardous substances
stationary and moving machinery, parts and components
manual handling hazards.

'Rectify routine problems' means 'apply known solutions to a limited range of predictable problems'.

Typical process problems include:
equipment malfunction
variations in temperature, pressure, rotation
variations in materials or contamination of materials
mould damage.

Typical product problems include:
routine rotational moulding faults
machine malfunction
mould/tooling problems
variations in materials and/or contamination of materials.

All operations are performed in accordance with procedures.

Essential knowledge and enterprise requirements
Application of knowledge of the materials, equipment and process sufficient to recognise out of specification products, process problems and materials faults.
Knowledge of the enterprise's procedures and relevant regulatory requirements along with the ability to implement them within appropriate time constraints and work standards.

Competence includes the ability for the practical completion of the job to:
apply and/or describe:
operation of rotational moulding equipment and components
effects of shrinkage on material colour
production workflow sequences and materials demand
reasons for checking process control panels and reporting readings which do not conform to the work instructions
approved hazard control and safety procedures and the use of PPE in relation to handling materials, equipment operation and cleanup
potential effects of variations in raw materials and equipment operation in relation to quality of product
waste management and importance of reusing non-conforming products wherever possible
correct selection and use of equipment, materials, processes and procedures
plan own work including predicting consequences and identifying improvements
monitor equipment operation and product quality
identify when the operator is able to rectify faults, when assistance is required and who is the appropriate source for assistance
identify and describe own role and role of others involved directly in the rotational moulding process
identify factors which may affect product quality or production output and appropriate remedies
use PPE, safely handle products and materials, read relevant safety information and apply safety precautions appropriate to the task
pause equipment, or shut down equipment in abnormal circumstances
explain the effect of unauthorised or emergency shutdown in relation to safety and production requirements
distinguish between possible causes of routine rotational moulding faults such as:
incorrect quantity of materials
contaminated materials/additives
equipment faults
mould damage
temperature/time faults
rotation speed/motion problems
wrong raw materials/additives
incorrect quantity of materials/additives
machine failure.

Critical aspects
It is essential that competence is demonstrated in the ability to:
recognise the importance of material properties and qualities
apply approved procedures
take appropriate action to resolve faults or report faults to appropriate personnel
explain and implement emergency shutdown procedures.

Consistent performance should be demonstrated. In particular look to see that :
rotational moulding production standards are met consistently
upstream and downstream communication is timely and effective
operating procedures and work instructions are read and interpreted correctly
problems are identified and appropriate action is taken (i.e. the problem is fixed or reported)
all safety procedures are followed.

Language, literacy and numeracy requirements
This unit requires the ability to read and interpret typical product specifications, job sheets, procedures, material labels and safety information as provided to operators.
Writing is required to the level of completing workplace forms.
Basic numeracy is required, e.g. to determine that two 25 kg bags are needed to make up a requirement for 50 kg.

Assessment method and context
Competence in this unit may be assessed:
on an operating plant allowing for operation under all normal and a range of abnormal conditions
by use of a suitable simulation and/or a range of case studies/scenarios
by a combination of these techniques.

In all cases it is expected that practical assessment will be combined with targeted questioning to assess the underpinning knowledge and that the theoretical assessment will be combined with appropriate practical/simulation or similar assessment.

Resource implications
This section should be read in conjunction with the range of variables for this unit of competency. Resources required include suitable access to an operating plant or equipment that allows for appropriate and realistic simulation. A bank of case studies/scenarios and questions will also be required to the extent they form part of the assessment method. Questioning may take place either in the workplace, or in an adjacent, quiet facility such as an office or lunchroom. No other special resources are required.