Unit of competency Outline

Date retreived
22/07/2026 2:10 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Apply plural component coatings

Apply plural component coatings

Unit of competency
National Code
MSFFF3012
State Code
OEL81
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
08/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030117 - Furniture Polishing
Original Release Date
19/04/2023
Nominal Hours
56
Description
This unit describes the skills and knowledge required to apply plural component coatings, including polyurethane, polyester and acid catalysed coatings, to surfaces including solid timber, manufactured board and metal. Work may be performed individually or in a team.Furniture finishing workers with this competency follow established procedures, using discretion, judgement and problem-solving to identify and resolve potential issues. They recognise dependencies and use cooperative approaches to optimise workflow and productivity.No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare for task
  • 1.1 Determine task requirements, including surface characteristics and required surface treatment, from work documentation
  • 1.2 Plan for work by identifying processing and application techniques, time and safety requirements and efficient work methods
  • 1.3 Identify and follow work health and safety requirements
  • 1.4 Identify tools, equipment and accessories to meet task requirements and check for safety and functionality
2. Prepare for application of materials
  • 2.1 Check surfaces for contamination and correct preparation in accordance with workplace procedures and standards
  • 2.2 Identify products with surface or other faults and perform required repairs
  • 2.3 Identify and prepare required materials
  • 2.4 Inspect and clean spray booths to ensure nitro-cellulose lacquer remnants are not present in booth prior to application of plural component coatings, referring to work documentation to establish booth use
  • 2.5 Perform trial application of plural component coatings to check equipment operation, materials consistency and viscosity meets job requirements
  • 2.6 Identify and rectify or adjust faults or inconsistencies in applied coating in accordance with workplace procedures
3. Apply finishing materials
  • 3.1 Identify and select techniques for applying plural component coatings
  • 3.2 Apply materials in accordance with job instructions, material manufacturer specifications and workplace procedures
  • 3.3 Inspect finished products and approve for suitability for further processing
  • 3.4 Rectify products that do not meet quality specifications or tag for further investigation in accordance with workplace procedures
4. Clean work area and maintain equipment
  • 4.1 Check, clean and store equipment and unused materials in accordance with workplace procedures
  • 4.2 Tag unserviceable equipment, identify faults and inform appropriate personnel in accordance with workplace procedures
  • 4.3 Clean work area, safely dispose of waste and identify items for recycling in accordance with workplace procedures and environmental standards
  • 4.4 Complete required workplace records
No information
No information
Replaces
State Code National Code Title Type
WI323 MSFFF3003 Apply plural component coatings Unit of competency