Unit of competency Outline

Date retreived
22/07/2026 8:05 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Service marine internal combustion engines and propulsion and auxiliary systems

Service marine internal combustion engines and propulsion and auxiliary systems

Unit of competency
National Code
MARB028
State Code
OAB58
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
22/11/2024
View on TGA
State Implementation and Classification
Approved Date
06/12/2018
Field of Education
031701 - Maritime Engineering
Original Release Date
06/12/2018
Nominal Hours
50
Description
Notes
Elements and Performance Criteria
1 Prepare for work
  • 1.1 Planned maintenance program is accessed to determine servicing requirements
  • 1.2 Inspections are conducted and additional non-routine servicing requirements are determined
  • 1.3 Manufacturer specifications for equipment are obtained
  • 1.4 Tasks are planned and sequenced in conjunction with others involved in or affected by servicing work
  • 1.5 Equipment is safely isolated according to regulations and work health and safety (WHS)/occupational health and safety (OHS) requirements
  • 1.6 Tools and equipment are selected and checked for serviceability
  • 1.7 Work area is prepared
2 Carry out routine service
  • 2.1 Equipment is inspected throughout servicing and inspection results are compared with manufacturer specifications
  • 2.2 Servicing tasks are carried out to specifications
  • 2.3 Mechanical equipment and system components are checked with appropriate instruments
  • 2.4 Unserviceable equipment is tagged according to workplace procedures and appropriate personnel are notified
3 Repair and replace faulty components
  • 3.1 Faulty items or components are removed using appropriate tools and equipment according to workplace procedures
  • 3.2 Replaceable items are selected or serviceable items are fitted according to manufacturer specifications
  • 3.3 Adjustments are made to equipment or components to ensure compliance with specifications
  • 3.4 Operational check is carried out on system to ensure compliance with manufacturer specifications
4 Clean up and complete documentation
  • 4.1 Work area is cleared and cleaned
  • 4.2 Materials are disposed of or recycled according to legislative and workplace requirements
  • 4.3 Tools and equipment are cleaned, checked and stored according to workplace procedures
  • 4.4 Maintenance report is completed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WH796 MARB003 Service marine internal combustion engines, and propulsion and auxiliary systems Unit of competency