Unit of competency Outline

Date retreived
23/07/2026 5:50 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Erect a temporary modular support system (bailey) on an existing bridge

Erect a temporary modular support system (bailey) on an existing bridge

Unit of competency
National Code
RIICTB303D
State Code
WH167
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
27/05/2014
Field of Education
030901 - Construction Engineering
Original Release Date
27/05/2014
Nominal Hours
40
Description
This unit describes a participant’s skills and knowledge required to erect a temporary modular support system (bailey) on an existing bridge in Civil Construction.This unit is appropriate for those working in operational roles. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to erect a temporary modular support system (bailey) on an existing bridge
  • 1.1. Access, interpret and apply temporary modular support system (bailey) documentation and ensure the work activity is compliant
  • 1.2. Obtain, interpret, clarify and confirm work instructions before proceeding
  • 1.3. Confirm and apply environmental protection and safety requirements
  • 1.4. Obtain, interpret and implement traffic management signage requirements
  • 1.5. Select and check for faults plant, tools and equipment to carry out tasks
  • 1.6. Identify, confirm, safely handle and locate ready for use materials required for the work application
  • 1.7. Select and wear personal protective equipment appropriate for work activities
  • 1.8. Identify, address and report hazards, risks and environmental issues
  • 1.9. Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Set out and establish support system
  • 2.1. Assess load bearing capacity of the ground and/or timber directly under the support system
  • 2.2. Set out bearing locations
  • 2.3. Install supplementary supports
3. Assemble temporary modular bridge
  • 3.1. Assess condition of components for acceptable use and replace faulty parts
  • 3.2. Compile components and check inventory
  • 3.3. Mark location points for high capacity panelling
  • 3.4. Select resources, materials and equipment
  • 3.5. Sequence assembly process prior to commencement
  • 3.6. Assemble interlocking components using connections and fittings for the temporary modular bridge
  • 3.7. Re-check completed assembly
4. Disassemble temporary modular bridge
  • 4.1. Sequence disassembly process prior to commencement
  • 4.2. Select resources, materials and equipment
  • 4.3. Disassemble interlocking components including connections and fittings
  • 4.4. Compile components and check inventory
  • 4.5. Assess condition of components for acceptable reuse
  • 4.6. Store components
5. Clean up
  • 5.1. Clear work area and dispose of or recycle
  • 5.2. Clean, check, maintain and store machinery, tools and equipment
No information
No information
Replaced By
State Code National Code Title Type
OCX50 RIICTB303E Erect temporary modular support systems (baileys) on existing bridges Unit of competency
State Code National Code Title Type
BFA8 RII30919 Certificate III in Civil Construction Qualification
AZB0 RII30915 Certificate III in Civil Construction Qualification