Unit of competency Outline

Date retreived
22/07/2026 6:46 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Assemble partitions

Assemble partitions

Unit of competency
National Code
CPCCCA3026
State Code
OCP81
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040311 - Carpentry And Joinery
Original Release Date
01/06/2021
Nominal Hours
30
Description
This unit of competency specifies the skills and knowledge required to set out and assemble partitions for the purpose of dividing areas into useable spaces, meeting all relevant requirements of national construction codes, Australian Standards, work health and safety (WHS), and Commonwealth and state or territory legislation. It includes prefabricated and demountable partitions constructed of timber or metal.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare.
  • 1.1 Read and interpret work instructions and plan sequence of work.
  • 1.2 Plan all work to comply with laws and regulations, national construction codes, Australian Standards, work health and safety (WHS) and environmental requirements, manufacturers’ specifications, workplace requirements, drawings and specifications.
  • 1.3 Select tools and equipment, check for serviceability and report any faults.
  • 1.4 Select and use personal protective equipment (PPE) for each part of the task.
  • 1.5 Inspect work site, locate services, assess hazards and apply risk controls, including required signage and barricades.
  • 1.6 Select materials required for task, calculate quantities, handle safely and prepare and position ready for use.
2 Set out and cut components.
  • 2.1 Set out and mark location for partitions.
  • 2.2 Cut components to size.
  • 2.3 Distribute prefabricated or cut components and stack to suit job location and sequence of construction.
3 Assemble partitions.
  • 3.1 Mark and prepare locations for member connections to designed spacings.
  • 3.2 Install fixing and fastenings to secure each junction of members tight together, flush on partition face and within ±2mm of set out.
  • 3.3 Assemble partitions and secure square and plumb to specification.
4 Clean up
  • 4.1 Clean up, meeting all legislative and workplace requirements for safety, waste disposal and materials handling.
  • 4.2 Check, maintain and store tools and equipment and report any faults.
No information
No information
No information
State Code National Code Title Type
BGB8 CPC30220 Certificate III in Carpentry Qualification
BGD6 CPC31920 Certificate III in Joinery Qualification
BGD5 CPC31220 Certificate III in Wall and Ceiling Lining Qualification