Unit of competency Outline
Date retreived
22/07/2026 10:37 PM AWST
22/07/2026 10:37 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Dock boards using computer programmed machinery
Dock boards using computer programmed machinery
Unit of competency
National Code
TLIW2024A
TLIW2024A
State Code
D5376
D5376
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
31/10/2014
Field of Education
030717 - Plant And Machine Operations
Original Release Date
31/10/2014
Nominal Hours
20
Description
This unit involves the skills and knowledge required to dock boards using computer programmed machinery in accordance with workplace procedures and specifications including preparing computer-programmed machinery to dock boards, operating the programmed machinery to dock boards to specifications, monitoring and rectifying the processing operations where necessary, and completing operations in accordance with workplace requirements. Licensing, legislative, regulatory or certification requirements are applicable to this unit.
Notes
Elements and Performance Criteria
1Prepare computer programmed machinery to dock boards
- 1.1 Appropriate workplace occupational health and safety and other regulatory procedures are followed
- 1.2 Job requirements regarding sizes and lengths are obtained from standards
- 1.3 Start-up checks are completed according to workplace standard procedures
- 1.4 General cross-section, length and condition of boards on conveyor are visually assessed in accordance with workplace quality standards
- 1.5 Program to cut requirements is selected from a range of available programs
- 1.6 Program is loaded and machine cycle checked
- 1.7 Need for new programs is identified and reported to supervisor
- 1.8 Communication with supervisor and other workers is maintained to ensure efficient work flow
2Operate programmed machinery to dock boards
- 2.1 Trial boards are cut to check process and output
- 2.2 Machinery is operated to dock timber to specification
- 2.3 Reject boards are identified and directed for waste or recovery
- 2.4 Faults/problems with materials or componentry are identified and appropriate action is undertaken in accordance with workplace procedures
3Monitor and rectify the processing operations where necessary
- 3.1 Dimensions and finish of cut boards are regularly checked in accordance with workplace standard procedures
- 3.2 Sawing process is adjusted to maintain accurate sizing
- 3.3 Feed systems are regularly monitored for material flow problems
- 3.4 Minor feed problems are cleared in accordance with equipment manufacturers instructions
- 3.5 Characteristics of blunt and damaged saws are recognised and appropriate action is taken to rectify the identified problem in accordance with workplace procedures
- 3.6 Saw blades are removed and replaced in accordance with workplace procedures
- 3.7 Work area is regularly cleaned in accordance with workplace procedures
4Complete operations
- 4.1 Machine shut-down is conducted according to workplace and manufacturers guidelines
- 4.2 Boards are relocated to holding area without damage to boards, personnel or equipment
- 4.3 Waste materials are directed for disposal or recovery
- 4.4 Production records are completed in accordance with workplace procedures
- 4.5 Maintenance program (where applicable) is completed and recorded in accordance with workplace procedures
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Work may be conducted:
in a range of work environments by day or night
Customers may be:
internal or external
Workplaces may comprise:
large, medium or small worksites
Workplace environment may include:
movement of equipment, goods, products, materials and vehicular traffic
The docking process is conducted:
as part of manufacture/repair activities with the operator using discretion and judgement within established specifications
Timber may be:
hardwood or softwood
Docking equipment covers:
computer controlled docking and trimming saws to which boards are mechanically fed
Equipment may include:
single or multiple saw positions
Visual assessment may cover the requirements of Australian Standards AS 2858 or AS 2082 and specifically includes:
timber types and species
timber characteristics
end condition of the timber
OH&S requirements include:
manual handling, protective clothing, elimination/control of hazards, machine isolation and machine guarding
Personal protective equipment may include:
gloves
safety headwear and footwear
safety glasses
two-way radios
high visibility clothing
Hazards in the work area may include exposure to:
chemicals
dangerous or hazardous substances
stationary and moving equipment, parts and materials
noise, light, energy sources
electrical equipment
humidity, air temperature, radiant heat
debris on floor
faulty racking
poorly stacked materials or finished pallets
faulty equipment
Consultative processes may involve:
workplace personnel
supervisors and managers
customers/clients
suppliers
contractors
union representatives
industrial relations and OH&S specialists
other professional or technical staff
Communication in the work area may include:
phone
fax
email
internet
barcode readers
oral, aural or signed communications
Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:
company procedures
enterprise procedures
organisational procedures
established or standard procedures
Information/documents may include:
job specifications and workplace operating procedures
relevant Australian or international standards
manufacturers specifications for equipment/tools
supplier and/or client instructions
quality assurance standards for pallet manufacture
material safety data sheets (where applicable)
codes of practice including the National Standards for Manual Handling and the Industry Safety Code
relevant regulations including the ADG Code
award, enterprise bargaining agreement, other industrial arrangements
standards and certification requirements
emergency procedures
Applicable regulations and legislation may include:
relevant codes and regulations pertaining to pallet manufacture
Australian Standards AS 2858 and AS 2082
relevant state/territory OH&S legislation
relevant state/territory environmental protection legislation
licence, patent or copyright arrangements
ADG Code and regulations
workplace relations regulations including equal opportunity, equal employment opportunity and affirmative action legislation
workers compensation regulations
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.
Work may be conducted:
in a range of work environments by day or night
Customers may be:
internal or external
Workplaces may comprise:
large, medium or small worksites
Workplace environment may include:
movement of equipment, goods, products, materials and vehicular traffic
The docking process is conducted:
as part of manufacture/repair activities with the operator using discretion and judgement within established specifications
Timber may be:
hardwood or softwood
Docking equipment covers:
computer controlled docking and trimming saws to which boards are mechanically fed
Equipment may include:
single or multiple saw positions
Visual assessment may cover the requirements of Australian Standards AS 2858 or AS 2082 and specifically includes:
timber types and species
timber characteristics
end condition of the timber
OH&S requirements include:
manual handling, protective clothing, elimination/control of hazards, machine isolation and machine guarding
Personal protective equipment may include:
gloves
safety headwear and footwear
safety glasses
two-way radios
high visibility clothing
Hazards in the work area may include exposure to:
chemicals
dangerous or hazardous substances
stationary and moving equipment, parts and materials
noise, light, energy sources
electrical equipment
humidity, air temperature, radiant heat
debris on floor
faulty racking
poorly stacked materials or finished pallets
faulty equipment
Consultative processes may involve:
workplace personnel
supervisors and managers
customers/clients
suppliers
contractors
union representatives
industrial relations and OH&S specialists
other professional or technical staff
Communication in the work area may include:
phone
fax
internet
barcode readers
oral, aural or signed communications
Depending on the type of organisation concerned and the local terminology used, workplace procedures may include:
company procedures
enterprise procedures
organisational procedures
established or standard procedures
Information/documents may include:
job specifications and workplace operating procedures
relevant Australian or international standards
manufacturers specifications for equipment/tools
supplier and/or client instructions
quality assurance standards for pallet manufacture
material safety data sheets (where applicable)
codes of practice including the National Standards for Manual Handling and the Industry Safety Code
relevant regulations including the ADG Code
award, enterprise bargaining agreement, other industrial arrangements
standards and certification requirements
emergency procedures
Applicable regulations and legislation may include:
relevant codes and regulations pertaining to pallet manufacture
Australian Standards AS 2858 and AS 2082
relevant state/territory OH&S legislation
relevant state/territory environmental protection legislation
licence, patent or copyright arrangements
ADG Code and regulations
workplace relations regulations including equal opportunity, equal employment opportunity and affirmative action legislation
workers compensation regulations
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:
the underpinning knowledge and skills
relevant legislation and workplace procedures
other relevant aspects of the range statement
Context of and specific resources for assessment
Performance is demonstrated consistently over a period of time and in a suitable range of contexts
Resources for assessment include:
a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or
access to an appropriate range of relevant operational situations in the workplace
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment, and
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals
Method of assessment
Assessment of this unit must be undertaken by a registered training organisation
As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests
Practical assessment must occur:
through activities in an appropriately simulated environment at the registered training organisation, and/or
in an appropriate range of situations in the workplace
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required knowledge and skills, the range statement and the assessment guidelines for this Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria of this unit and include demonstration of applying:
the underpinning knowledge and skills
relevant legislation and workplace procedures
other relevant aspects of the range statement
Context of and specific resources for assessment
Performance is demonstrated consistently over a period of time and in a suitable range of contexts
Resources for assessment include:
a range of relevant exercises, case studies and/or other simulated practical and knowledge assessment, and/or
access to an appropriate range of relevant operational situations in the workplace
In both real and simulated environments, access is required to:
relevant and appropriate materials and equipment, and
applicable documentation including workplace procedures, regulations, codes of practice and operation manuals
Method of assessment
Assessment of this unit must be undertaken by a registered training organisation
As a minimum, assessment of knowledge must be conducted through appropriate written/oral tests
Practical assessment must occur:
through activities in an appropriately simulated environment at the registered training organisation, and/or
in an appropriate range of situations in the workplace
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AWL16 | TLIW2024 | Dock boards using computer programmed machinery | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W925 | TLI31610 | Certificate III in Warehousing Operations | Qualification |