Unit of competency Outline
Date retreived
22/07/2026 1:12 PM AWST
22/07/2026 1:12 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Construct multiple aquifer production bores
Construct multiple aquifer production bores
Unit of competency
National Code
RIINHB322E
RIINHB322E
State Code
OBW19
OBW19
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
05/03/2021
Field of Education
030303 - Mining Engineering
Original Release Date
05/03/2021
Nominal Hours
40
Description
This unit describes the skills and knowledge required to construct multiple aquifer production bores. It includes designing, constructing and developing multiple aquifer bores, disinfecting bores and equipment and decommissioning bores.It applies to those working in operational roles. They generally perform tasks involving a broad range of skilled applications in a wide variety of contexts, which may involve some discretion and judgement in selecting equipment, services and contingency measures.Licensing, legislative and certification requirements that may apply to this unit can vary between states, territories, and industry sectors and must be sourced from relevant jurisdictions prior to applying this unit.
Notes
Elements and Performance Criteria
1. Plan and design for constructing multiple aquifer bores
- 1.1 Obtain, interpret and confirm work requirements
- 1.2 Access, interpret and apply multiple aquifer drilling documentation and confirm work activity is compliant
- 1.3 Identify and minimise environmental issues and potential hazards, and assess and address risks within scope of own role and according to workplace procedures
- 1.4 Site a bore and design multiple aquifer bore according to work and legislative requirements
- 1.5 Select and wear personal protective equipment required for work activity
- 1.6 Communicate with other personnel at site according to work requirements and confirm briefings and handover details are communicated and received
2. Construct and develop multiple aquifer bores in line with established requirements
- 2.1 Drill and isolate target production zone from other formations
- 2.2 Log strata encountered during drilling according to workplace procedures
- 2.3 Confirm or amend bore design based on testing and encountered geology
- 2.4 Construct bore according to confirmed or amended design using advanced construction techniques (multiple casing strings and pressure cementing)
- 2.5 Undertake bore development until a continuous, clean supply of water is obtained, in accordance with acceptable and practical limits set by site, contractual or regulatory requirements
- 2.6 Estimate yield by using yield testing methodologies
- 2.7 Complete written bore construction record according to workplace procedures
3. Disinfect/decontaminate bore and drilling equipment in line with established requirements
- 3.1 Determine and monitor potential contaminants of drilling equipment
- 3.2 Disinfect/decontaminate bores and installed equipment constructed for potable supplies
4. Decommission bore holes in line with established requirements
- 4.1 Determine suitable decommissioning procedures for failed or unwanted bores and select appropriate materials
- 4.2 Seal the bore as per legislative requirements
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WH489 | RIINHB322D | Construct multiple aquifer production bores | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BFI5 | RII31820 | Certificate III in Drilling Operations | Qualification |