Unit of competency Outline

Date retreived
22/07/2026 9:39 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Plan and organise work

Plan and organise work

Unit of competency
National Code
UEPOPS439
State Code
OAG33
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
31/10/2018
View on TGA
State Implementation and Classification
Approved Date
15/05/2019
Field of Education
120505 - Work Practices Programmes
Original Release Date
15/05/2019
Nominal Hours
27
Description
This unit involves the skills and knowledge required to undertake the planning and organising of work tasks to be undertaken by a workplace team.Planning and organising work activities requires tasks to be identified, the development of a plan and the organisation of tasks that are assigned to team members. Competency in this unit requires the ability to plan and prepare work, coordinate and allocate work tasks to the team, the completion of work documentation and the reporting on status of completion. Individuals will, in general, work as an operator, in a power generation facility.Power generation plant operators are typically trained and authorised to isolate, prepare plant and issue permits to work.No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit may require a licence or training permit to practice in the workplace where work is carried out on gas and electrical installations. Additional conditions may apply under state and territory legislative and regulatory licensing requirements.
Notes
Elements and Performance Criteria
1 Plan and prepare for work
  • 1.1 Work requirements, including permits, are identified from work orders and are confirmed with appropriate personnel and site inspection, in accordance with workplace procedures
  • 1.2 Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, industry standards, legislative requirements, codes of practice, manufacturers' specifications, environmental obligations and workplace procedures are identified, applied and monitored
  • 1.3 Materials, equipment and resources to satisfy team tasks are obtained and inspected for compliance with job specifications, in accordance with workplace procedures
  • 1.4 Team work is planned, in accordance with workplace procedures, using appropriate plans, drawings, manuals and industry standards
2 Coordinate work
  • 2.1 Tasks are assigned and monitored to ensure compliance with plans and work requirements, in accordance with workplace procedures
  • 2.2 Provision for recycling or reuse of materials is undertaken, where possible, in accordance with workplace procedures
  • 2.3 Work tasks are modified to meet unforeseen circumstances and any changes are communicated promptly, in accordance with workplace procedures
3 Complete work
  • 3.1 Finalisation of work and restoration of site is monitored, in accordance with workplace procedures
  • 3.2 Permits are signed off and appropriate personnel are notified of work completion, in accordance with workplace procedures
  • 3.3 Work records, costing data and reports are prepared and finalised, in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WE418 UEPOPS439B Plan and organise work Unit of competency
Replaced By
State Code National Code Title Type
ODY08 UEPOPS127 Plan and organise work Unit of competency