Unit of competency Outline

Date retreived
22/07/2026 8:50 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Dock boards with mechanical feed

Dock boards with mechanical feed

Unit of competency
National Code
FWPSAW2204
State Code
AXK15
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030111 - Wood MacHining And Turning
Original Release Date
05/10/2016
Nominal Hours
20
Description
This unit of competency describes the outcomes required to dock material to length with a power driven saw and the aid of a mechanical feed which is monitored for flow problems. Work is completed in a forest products factory setting and includes operator maintenance.The unit applies to Sawmill Worker, Production Worker, Timber Grader. No licensing, legislative, regulatory, or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for docking
  • 1.1 Review work order and where required check with appropriate personnel.
  • 1.2 Select appropriate personal protective and other equipment and check for operational effectiveness.
  • 1.3 Plan board cutting pattern and saw set-up sequences in line with work order.
2. Dock boards to length
  • 2.1 Use equipment in line with organisational safety procedures, manufacturer’s instructions and environmental protection practices.
  • 2.2 Mark boards and set stops for cutting.
  • 2.3 Follow docking sequence to produce required quantity.
  • 2.4 Check cuts for length and grade within set tolerance.
  • 2.5 Dispose of incorrect cuts, off-cuts and sub-standard boards in line with environmental protection practices.
  • 2.6 Monitor mechanical feed systems regularly for material flow problems and clear blockages.
  • 2.7 Stack material in designated location safely, in line with work order.
  • 2.8 Identify routine processing problems and resolve or report to appropriate personnel.
3. Complete operator maintenance
  • 3.1 Follow organisational safety procedures to lock out equipment.
  • 3.2 Check saw blades for bluntness or damage.
  • 3.3 Remove and replace saw blades in line with manufacturer's recommendations.
  • 3.4 Dispose of used blades in line with environmental protection practices.
  • 3.5 Complete basic non-specialist maintenance for equipment.
  • 3.6 Keep machine clear of dust and debris in line with organisational safety procedures.
  • 3.7 Record and report equipment faults and maintenance requirements to appropriate personnel.
No information
No information
Replaces
State Code National Code Title Type
D6050 FPISAW2204B Dock boards with mechanical feed Unit of competency
Replaced By
State Code National Code Title Type
OFD28 FWPCOT2268 Cut timber or engineered wood product to length or dimensions Unit of competency
State Code National Code Title Type
BAL2 FWP20316 Certificate II in Sawmilling and Processing Qualification