Unit of competency Outline

Date retreived
22/07/2026 10:28 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform spinning operations

Perform spinning operations

Unit of competency
National Code
LMTTX2003B
State Code
W7498
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
16/07/2011
View on TGA
State Implementation and Classification
Approved Date
24/10/2014
Field of Education
030105 - Textile Making
Original Release Date
24/10/2014
Nominal Hours
50
Description
This unit covers the skills and knowledge to undertake and monitor machines used in spinning operations.
Notes
Elements and Performance Criteria
1 Set up and load machine
  • 1.1 Specifications are checked to identify requirements for production.
  • 1.2 Machine settings are adjusted to meet product requirements.
  • 1.3 Product is loaded for processing according to manufacturer specifications.
  • 1.4 Product is unloaded ready for next process.
  • 1.5 Non-conforming materials are reported.
  • 1.6 Area around machine is kept clean during setting and loading.
2 Operate and monitor machine
  • 2.1 Machine is started and stopped in accordance with manufacturer requirements.
  • 2.2 Machine operations are monitored to ensure correct operation.
  • 2.3 Waste is sorted.
  • 2.4 Machine is cleaned when required.
  • 2.5 Minor product process and machine faults are identified and corrected where necessary to meet specified requirements and are reported.
  • 2.6 Major machine faults are reported.
3 Check yarn quality
  • 3.1 Product is checked against quality standards.
  • 3.2 Product is assessed for faults and non-conformances.
  • 3.3 Product faults are rectified or reported.
4 Complete operations
  • 4.1 Product is doffed and replaced according to manufacturer specifications.
  • 4.2 Product is dispatched to next process.
  • 4.3 Cleaning of area is completed to ensure work environment is maintained in a safe and productive manner.
  • 4.4 Production records and other documentation are accurately completed.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Machines may include
drawing machines
roving machines
spinning machines
twisting machines
winding machines
Product requirements may include
count
twist
ply
tension
weight
lubrication
twist direction
strength
extension
Machine operations may include
drafting
twisting
splicing
piecing up, joining
fault identification
steaming
vacuuming
oiling
Faults may include
double ends
high thin places
wrong count
contamination
piecing up
OHS practices
OHS practices include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may relate to:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
environmental practices
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.

Critical aspects of evidence to be considered
Demonstrates skills and knowledge to:
interpret production orders and schedules
check machine settings to meet production requirements
monitor spinning operations according to defined procedures and methods
make minor adjustments
check product against quality standards
load and unload products according to workplace practices
complete records accurately and completely
apply OHS practices in work operations

Consistency in performance
Consistently applies skills and knowledge when:
organising work
completing tasks according to instructions
working systematically with attention to detail
identifying improvements and avoiding damage
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions

Resource implications
Access is required to real or appropriately simulated situations, including work areas, materials and equipment, and to information on workplace practices and OHS practices.

Context for assessment
Assessment may occur on the job or in an appropriately simulated environment.

Interdependent Assessment
This unit may be assessed independently or in combination with other relevant units.
Replaces
State Code National Code Title Type
E1916 LMTPRTX01BA Operate machines for production - 2 Unit of competency
W6617 LMTTX2003A Perform spinning operations Unit of competency
Replaced By
State Code National Code Title Type
BAU29 MSTTX2008 Operate a machine for complex production operations Unit of competency