Unit of competency Outline

Date retreived
24/07/2026 6:15 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Modify digital signal processing (DSP) based sub-systems

Modify digital signal processing (DSP) based sub-systems

Unit of competency
National Code
UEEEC0045
State Code
OCB07
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
05/10/2020
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
12/07/2021
Nominal Hours
72
Description
This unit involves the skills and knowledge required to modify electronic digital signal processing (DSP) based sub-systems.It includes following design brief, applying knowledge of digital and analogue devices, interpreting device specifications, constructing prototypes, testing developed sub-system prototype operation, and documenting design and development work.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify DSP based system modification requirements
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied
  • 1.2 Hazards are identified, WHS/OHS risks are assessed, and control measures and workplace procedures are implemented in preparation for work
  • 1.3 Scope of proposed electronic DSP based sub-system is determined from design brief in consultation with relevant person/s
  • 1.4 Design development work is planned to meet scheduled timelines in consultation with persons/s involved on the worksite
  • 1.5 Materials and devices/components required to modify sub-system are determined on compatibility of design specifications with DSP based sub-system requirements and project budget constraints
2 Modify DSP based sub-system prototype
  • 2.1 WHS/OHS risk control measures and workplace procedures are followed
  • 2.2 Digital and analogue elements used in DSP based systems and industry compliance standards are applied to the sub-system design
  • 2.3 Alternative design modifications are considered based on the design brief
  • 2.4 Safety, functional and budget considerations are incorporated in the design
  • 2.5 Prototype devices and circuits are constructed, programmed and tested for compliance with the design brief and regulatory requirements
  • 2.6 Prototype faults are rectified and retested to ensure effective operation of design
  • 2.7 DSP based system modification is documented for submission to appropriate person/s for approval
  • 2.8 Solutions to unplanned situations are implemented in accordance with workplace policy
3 Obtain design approval for electronic DSP based sub-system modification
  • 3.1 DSP based sub-system modification is presented and explained to client representative and/or relevant person/s
  • 3.2 Alterations to the design are negotiated with relevant person/s within the constraints of workplace policy, as required
  • 3.3 Final sub-system design is documented and approval obtained from appropriate person/s
  • 3.4 Quality of work is monitored against performance agreement and/or workplace or relevant industry standards
No information
No information
Replaces
State Code National Code Title Type
WC609 UEENEEH184A Modify digital signal processing (DSP) based sub-systems Unit of competency