Unit of competency Outline
Date retreived
22/07/2026 10:37 PM AWST
22/07/2026 10:37 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Perform basic analytical tests
Perform basic analytical tests
Unit of competency
National Code
FDFLAB2001A
FDFLAB2001A
State Code
S7951
S7951
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
13/06/2012
Field of Education
019909 - Laboratory Technology
Original Release Date
13/06/2012
Nominal Hours
30
Description
This unit covers the skills and knowledge required to perform a range of analytical tests and measurements in a winery laboratory using standard methods. Work is usually done under routine supervision.
Notes
Elements and Performance Criteria
1. Prepare for testing
- 1.1 Samples are registered and prepared for testing
- 1.2 Materials are prepared to meet requirements
- 1.3 Services are confirmed as available and ready for use
- 1.4 Equipment is selected, prepared and checked to confirm readiness for use
- 1.5 Defects in samples, test materials and equipment are identified, rectified and/or reported
2. Perform testing
- 2.1 Test method is carried out according to workplace procedures
- 2.2 Equipment and materials are used according to workplace procedures
- 2.3 Results are read and interpreted
- 2.4 Out-of-standard results are identified and appropriate action taken
3. Complete testing
- 3.1 Waste generated by the testing is monitored and cleared according to workplace procedures
- 3.2 Equipment is prepared for cleaning
- 3.3 Work is conducted in accordance with workplace environmental guidelines
4. Record information
- 4.1 Workplace information is recorded in the appropriate format
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Policies and procedures
Work is carried out in accordance with workplace procedures, licensing requirements and legislative requirements
Workplace information
Workplace information may include:
Standard Operating Procedures (SOPs)
specifications
production schedules
instructions
work notes
Material Safety Data Sheets (MSDS)
manufacturer instructions
verbal direction from laboratory manager, supervisor or senior operator
Sample preparation
Sample preparation may include:
fining
filtration
centrifugation
dissolving
degassing
Tests
The range of tests performed may include the following techniques:
volumetric analysis, titration (acid base/redox), pipetting, densities, refractive indices, filtration, distillation/reflux, gravimetric tests, potentiometry and turbimetric analysis
Typical tests performed at this level should include:
sugar by hydrometry and refractometry, pH, baumé/brix, titratable acid, alcohol, sulphur dioxide, protein stability, tartrate stability and may include reducing sugars, volatile acid, ascorbic acid, malic acid by chromatography, YAN by titration, turbidity, specific gravity/density, simple colourimetric analysis, carbon dioxide, dissolved oxygen, and other tests as required by the workplace
Equipment
Equipment may vary and should include that listed in SOPs
Materials
Materials may vary and should include those listed in SOPs
Equipment status
Confirming equipment status involves:
checking that hygiene and sanitation standards, safety standards and pre-start requirements are met and that equipment is operational
checking the operation and/or calibration of measuring instrumentation
Services
Services may include:
water
gas
power
Information systems
Information systems may be:
print or screen based
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Policies and procedures
Work is carried out in accordance with workplace procedures, licensing requirements and legislative requirements
Workplace information
Workplace information may include:
Standard Operating Procedures (SOPs)
specifications
production schedules
instructions
work notes
Material Safety Data Sheets (MSDS)
manufacturer instructions
verbal direction from laboratory manager, supervisor or senior operator
Sample preparation
Sample preparation may include:
fining
filtration
centrifugation
dissolving
degassing
Tests
The range of tests performed may include the following techniques:
volumetric analysis, titration (acid base/redox), pipetting, densities, refractive indices, filtration, distillation/reflux, gravimetric tests, potentiometry and turbimetric analysis
Typical tests performed at this level should include:
sugar by hydrometry and refractometry, pH, baumé/brix, titratable acid, alcohol, sulphur dioxide, protein stability, tartrate stability and may include reducing sugars, volatile acid, ascorbic acid, malic acid by chromatography, YAN by titration, turbidity, specific gravity/density, simple colourimetric analysis, carbon dioxide, dissolved oxygen, and other tests as required by the workplace
Equipment
Equipment may vary and should include that listed in SOPs
Materials
Materials may vary and should include those listed in SOPs
Equipment status
Confirming equipment status involves:
checking that hygiene and sanitation standards, safety standards and pre-start requirements are met and that equipment is operational
checking the operation and/or calibration of measuring instrumentation
Services
Services may include:
water
gas
power
Information systems
Information systems may be:
print or screen based
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Assessment must be carried out in a manner that recognises the cultural and literacy requirements of the assessee and is appropriate to the work performed. Competence in this unit must be achieved in accordance with food safety standards and regulations.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Evidence of ability to:
prepare equipment and materials for conducting tests
conduct basic tests according to workplace requirements
identify out-of-standard results
conduct housekeeping and dispose of waste according to workplace standards
complete documentation.
Context of and specific resources for assessment
Assessment must occur in a real or simulated workplace where the assessee has access to:
personal protective clothing and equipment as required
work procedures, including advice on company practices, safe work practices, food safety, quality and environmental requirements
instructions, information, specifications and schedules as required
equipment, services and corresponding information as required
products and materials as required
internal and external customers and suppliers as required
cleaning procedures, materials and equipment as required
documentation and recording requirements and procedures.
Method of assessment
This unit should be assessed together with other units of competency relevant to the function or work role.
Guidance information for assessment
To ensure consistency in one's performance, competence should be demonstrated on more than one occasion over a period of time in order to cover a variety of circumstances, cases and responsibilities, and where possible, over a number of assessment activities.
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
Assessment must be carried out in a manner that recognises the cultural and literacy requirements of the assessee and is appropriate to the work performed. Competence in this unit must be achieved in accordance with food safety standards and regulations.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Evidence of ability to:
prepare equipment and materials for conducting tests
conduct basic tests according to workplace requirements
identify out-of-standard results
conduct housekeeping and dispose of waste according to workplace standards
complete documentation.
Context of and specific resources for assessment
Assessment must occur in a real or simulated workplace where the assessee has access to:
personal protective clothing and equipment as required
work procedures, including advice on company practices, safe work practices, food safety, quality and environmental requirements
instructions, information, specifications and schedules as required
equipment, services and corresponding information as required
products and materials as required
internal and external customers and suppliers as required
cleaning procedures, materials and equipment as required
documentation and recording requirements and procedures.
Method of assessment
This unit should be assessed together with other units of competency relevant to the function or work role.
Guidance information for assessment
To ensure consistency in one's performance, competence should be demonstrated on more than one occasion over a period of time in order to cover a variety of circumstances, cases and responsibilities, and where possible, over a number of assessment activities.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W0912 | FDFLABBATA | Perform basic analytical tests | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OAN13 | FBPLAB2003 | Perform basic analytical tests | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| D684 | FDF30411 | Certificate III in Wine Industry Operations | Qualification |
| D680 | FDF20411 | Certificate II in Wine Industry Operations | Qualification |