Unit of competency Outline

Date retreived
23/07/2026 12:40 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Match specific paint colours

Match specific paint colours

Unit of competency
National Code
CPCCPD3025
State Code
OCM70
TGA Status
Current
DTWD Status
Approved
Current Release Number
4.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040325 - Painting, Decorating And Sign Writing
Original Release Date
01/06/2021
Nominal Hours
44
Description
This unit of competency specifies the skills and knowledge required to colour-match new and existing painting finishes. The unit includes matching of paint colour to a specified sample.A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare.
  • 1.1 Review work instructions to interpret and match paint colour.
  • 1.2 Plan all work to meet relevant requirements of work health and safety (WHS), Commonwealth and state or territory legislation, environmental plans and obligations, manufacturers’ specifications, and workplace requirements.
  • 1.3 Select tools and equipment, including personal protective equipment (PPE), check for serviceability and report any faults.
2 Match paint colour tosample.
  • 2.1 From a provided colour sample, determine paint type and sheen level.
  • 2.2 Select paint type, paint base and colourants for colour match.
  • 2.3 Mix and match colour against sample and allow to dry.
  • 2.4 Test dry paint to establish accuracy of match of colour, adjusting and repeating testing process as required.
  • 2.5 Record details of colourants used to achieve the paint match.
3 Clean up.
  • 3.1 Clear work area and check and maintain tools and equipment and clean with appropriate solvents without damage.
  • 3.2 Dispose of water and solvents used in cleaning tools and equipment in an environmentally sustainable manner.
  • 3.3 Store tools, equipment and sealed unused materials to avoid spontaneous ignition.
No information
No information
Replaces
State Code National Code Title Type
D7389 CPCCPD3025A Match specified paint colour Unit of competency
State Code National Code Title Type
BGE5 CPC30620 Certificate III in Painting and Decorating Qualification