Unit of competency Outline

Date retreived
22/07/2026 4:27 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Rewind LV direct current machines

Rewind LV direct current machines

Unit of competency
National Code
UEEEL0066
State Code
OCB43
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
05/10/2020
View on TGA
State Implementation and Classification
Approved Date
12/07/2021
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
12/07/2021
Nominal Hours
54
Description
This unit involves the skills and knowledge required to prepare, place and connect coils and insulating in direct current (d.c.) motor armatures and poles.It includes preparing to and rewinding d.c. machines by working safely, using tools, measuring and stator windings. It also includes applying technical and quality industry standards and completing workplace reports and winding records.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare to rewind d.c. machine
  • 1.1 Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified and applied
  • 1.2 Existing WHS/OHS risk control measures for work preparation are followed
  • 1.3 Scope of work is determined from job specifications and regulatory requirements
  • 1.4 Advice is sought from the work supervisor to ensure the work is coordinated effectively with others
  • 1.5 Winding data is obtained from winding data records or directly from measurements of stator and recorded in accordance with workplace procedures
  • 1.6 Materials required for the work are obtained in accordance with workplace procedures and job specification
  • 1.7 Tools, equipment and testing devices needed to carry out work are obtained and checked for correct operation and safety
2 Rewind d.c. machine
  • 2.1 Existing WHS/OHS risk control work measures are followed
  • 2.2 Machines/equipment are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
  • 2.3 Induction machine is dismantled and parts tagged and stored to prevent loss or damage in accordance with workplace procedures and instructions
  • 2.4 Winding is stripped from stator in accordance with workplace procedures
  • 2.5 Armature and fields are wound and insulated in accordance with winding data, job specifications and workplace procedures
  • 2.6 Machine is assembled and prepared for inspection and testing in accordance with workplace procedures
  • 2.7 Unplanned situations are responded to in accordance with workplace procedures in a manner that minimises risk to personnel and equipment
  • 2.8 Routine quality checks are conducted to ensure coils are correctly wound, with correct wire, number of turns and shape in accordance with workplace procedures and job specifications
  • 2.9 Electrical coil work is completed in timeframe, environment and workplace conditions
3 Complete workplace reports
  • 3.1 WHS/OHS work completion risk control measures are followed
  • 3.2 Workplace report, forms/data sheets are completed accurately in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WC498 UEENEEG154A Rewind LV direct current machines Unit of competency