Unit of competency Outline

Date retreived
22/07/2026 6:49 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Monitor areas under council jurisdiction

Monitor areas under council jurisdiction

Unit of competency
National Code
LGAEHRR303B
State Code
C1944
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
2.00
Current Release Date
11/09/2012
View on TGA
State Implementation and Classification
Approved Date
14/08/2014
Field of Education
039901 - Environmental Engineering
Original Release Date
14/08/2014
Nominal Hours
40
Description
This unit covers monitoring areas under council jurisdiction to ensure compliance with local laws.
Notes
Elements and Performance Criteria
1. Inspect designated areas
  • 1.1 Designated areas to be inspected are identified and defined.
  • 1.2 Routine inspections of identified and defined areas are carried out in accordance with council requirements.
  • 1.3 Non-routine inspections are carried out in accordance with council requirements.
  • 1.4 Applications for approval, licences or permits are assessed in accordance with local laws and other appropriate legislation.
2. Identify, assess and act on areas of risk to the public and the environment
  • 2.1 Risks to the public and environment are identified and level of risk is determined.
  • 2.2 Appropriate action is taken and reported in accordance with legislation and council requirements.
  • 2.3 Evidence of offence is gathered and documented in accordance with council procedures.
3. Respond to complaints regarding risks to public health and safety or possible breaches of legislation
  • 3.1 Complete details of complaint are obtained and assessed for further action.
  • 3.2 Complainant is advised of proposed action in accordance with council procedures.
  • 3.3 Evidence is gathered and documented in accordance with council procedures and guidelines.
  • 3.4 Diaries or reports of incidents are fully completed in accordance with council standards.
4. Maintain records
  • 4.1 Information is recorded in accordance with council and legislative requirements.
  • 4.2 Details are recorded clearly, legibly and accurately.
  • 4.3 Records are secure, accessible and up to date.
5. Assist with the preparation and delivery of community education and promotional matters associated with local laws
  • 5.1 Prepared information is accurate and comprehensive and targeted to the likely audience.
  • 5.2 Input is sought from appropriate specialist sources to assist prior and during preparation, and in subsequent follow up in response to questions.
The Range Statement relates to the Unit of Competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording in the Performance Criteria is detailed below.
Areas may include:
beaches
foreshores
parklands
reserves
waterways
illegal landfills
parking
building sites
fairs and shows
pedestrian precincts and malls
backyards pools
any other areas under council jurisdiction
Risks may include:
irate motorists
congested traffic
building sites
used syringes
intoxicated persons
overhanging foliage
chemicals
bushfires
parking
animals
noxious weeds
jet skis
toxins
noxious odours
noise
air quality
cooling towers or systems
street signage
outdoor dining issues
unattended litter
foreshore, littoral or aquatic reserve threat to environment
dangerous dogs
manual handling practices
Appropriate action may include:
issuing on-the-spot fines in relation to certain offences
requiring work or activity to cease
making site safe
advising offending party and complainants of council policies and procedures and proposed next action
monitoring compliance with conditions of any approval, licence or permit issued including appropriate defining of approved areas where applicable
Overview of assessment requirements
A person who demonstrates competency in this unit will be able to perform the outcomes described in the Elements to the required performance level detailed in the Performance Criteria. The knowledge and skill requirements described in the Range Statement must also be demonstrated. For example, knowledge of the legislative framework and safe work practices that underpin the performance of the unit are also required to be demonstrated.
Critical aspects of evidence to be considered
Routine and non-routine inspection.
Risk assessment.
Response to complaints.
Appropriate utilisation of on-the-spot penalties.
Collection and maintenance of records.
Completion of incident reports in accordance with council standards.
Context of assessment
On the job or in a simulated work environment.
Method of assessment
The following assessment methods are suggested:
observation of the learner performing a range of workplace tasks over sufficient time to demonstrate handling of a range of contingencies
written and/or oral questioning to assess knowledge and understanding
completion of workplace documentation
third-party reports from experienced practitioners
completion of self-paced learning materials including personal reflection and feedback from trainer, coach or supervisor
Evidence required for demonstration of consistent performance
Evidence will need to be collected over time across a range of variables.
Resource implications
Access to a workplace or simulated case studies encompassing a range of council areas of responsibility and associated risks.
Replaces
State Code National Code Title Type
C4293 LGAEHRR303A Monitor areas under council jurisdiction Unit of competency