Unit of competency Outline

Date retreived
23/07/2026 1:23 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct mooring operations using mechanical equipment

Conduct mooring operations using mechanical equipment

Unit of competency
National Code
MARC061
State Code
ODO36
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
15/10/2021
View on TGA
State Implementation and Classification
Approved Date
07/01/2022
Field of Education
030717 - Plant And Machine Operations
Original Release Date
07/01/2022
Nominal Hours
25
Description
This unit involves the skills and knowledge required to conduct mooring operations using mechanical equipment.This unit applies to people working in the maritime industry as a Linesperson.Licensing/Regulatory InformationNo licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare equipment for mooring operations
  • 1.1 Appropriate personal protective equipment (PPE) is selected and assembled in accordance with workplace procedures
  • 1.2 Equipment is located, selected, and made ready in accordance with workplace procedures to achieve safe and efficient operations
  • 1.3 Routine pre-operational checks are carried out in accordance with manufacturer instructions and workplace procedures
  • 1.4 Non-operational equipment is tagged out, and reported to appropriate personnel
  • 1.5 Hazards are identified and control measures are applied in accordance with workplace procedures and reported
2 Operate mechanicalmooring equipment
  • 2.1 Equipment is operated in a safe and controlled manner within defined operating limits and in accordance with workplace procedures and manufacturer's instructions
  • 2.2 Equipment failure is identified, and action is taken and reported in accordance with workplace procedures (as required)
3 Complete equipment shut down
  • 3.1 Equipment is shut down in accordance with manufacturer instructions and workplace procedures
  • 3.2 Defective, damaged, or malfunctioning equipment is tagged out, recorded, and reported in accordance with workplace procedures
  • 3.3 All required documentation is completed in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
AWK84 MARC031 Shift mooring lines using mechanical means Unit of competency