Unit of competency Outline

Date retreived
23/07/2026 10:56 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Use steelfixing tools and equipment

Use steelfixing tools and equipment

Unit of competency
National Code
CPCCSF2002
State Code
OCP82
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
030717 - Plant And Machine Operations
Original Release Date
01/06/2021
Nominal Hours
60
Description
This unit specifies the skills and knowledge required to safely and effectively use steelfixing tools, plant and equipment. It includes identification, selection, storage, safe use and maintenance of a range of commonly used steelfixing tools, plant and equipment.It applies to those who work under the direction of more experienced workers to support steelfixing activities.Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCWHS1001 Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Plan and prepare to use steelfixing tools, plant and equipment.
  • 1.1 Read work order and associated documentation and clarify work tasks with relevant persons.
  • 1.2 Plan all work to comply with relevant legislation, regulations, standards, codes, work health and safety (WHS), environmental and workplace requirements.
  • 1.3 Identify hazards and identify risk controls.
  • 1.4 Erect required safety signage and barricades and fit personal protective equipment (PPE).
2 Select and check steelfixing tools, plant and equipment.
  • 2.1 Identify functions, operation and limitations of steelfixing tools, plant and equipment in accordance with manufacturer and workplace requirements.
  • 2.2 Review and follow WHS requirements for using steelfixing hand tools, power tools, plant and equipment.
  • 2.3 Select tools and equipment, including leads and hoses, tags, serviceability and safety, and rectify or report any faults.
  • 2.4 Check power tool guards, retaining bolts, couplings, gauges and controls, and maintain them in accordance with manufacturer requirements.
  • 2.5 Select equipment to hold or support material during operation.
  • 2.6 Perform pre-operational checks, including lubricants, hydraulic fluid and water, in accordance with manufacturer requirements.
3 Use steelfixing tools, plant and equipment.
  • 3.1 Connect power and compressed air supply to work area.
  • 3.2 Follow start-up and shutdown procedures in accordance with manufacturer requirements.
  • 3.3 Use tools, plant and equipment safely and effectively in accordance with manufacturer and WHS requirements.
  • 3.4 Place tools, plant and equipment in safe location when not in immediate use.
4 Clean up.
  • 4.1 Clear work area and dispose of, reuse or recycle materials in accordance with regulatory and workplace requirements.
  • 4.2 Clean, check, maintain and store tools and equipment in accordance with manufacturer and workplace requirements.
No information
No information
Replaces
State Code National Code Title Type
W9502 CPCCSF2002A Use steelfixing tools and equipment Unit of competency
State Code National Code Title Type
BGC4 CPC31120 Certificate III in Steelfixing Qualification