Unit of competency Outline

Date retreived
23/07/2026 2:36 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Rework product imperfections

Rework product imperfections

Unit of competency
National Code
PMBFIN203E
State Code
ODA62
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
18/02/2021
View on TGA
State Implementation and Classification
Approved Date
19/05/2021
Field of Education
030305 - Materials Engineering
Original Release Date
19/05/2021
Nominal Hours
26
Description
This unit describes the skills and knowledge required to identify rework requirements, select appropriate materials and equipment to undertake reworking, and rework a product to meet specifications, during production or assembly phases.This unit applies to an individual working alone or as part of a team.The unit principally refers to the support of a production process in composites or rotational moulding (rotomoulding). No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Check work requirements
  • 1.1 Read and interpret original product specifications and work order documentation
  • 1.2 Identify product faults and assess feasibility of reworking in the context of intended use of product and quality specifications
  • 1.3 Select technology according to technology specifications and reworking requirements
  • 1.4 Identify and assemble required equipment and set reworking method
  • 1.5 Plan work process stages including work sequences and durations within each stage, and engineering controls and required personal protective equipment (PPE) following established workplace procedures
  • 1.6 Design time-efficient and economical reworking processes that achieve quality standards and match workplace operating procedures
2. Perform reworking
  • 2.1 Identify and eliminate sources of contamination in preparation for reworking
  • 2.2 Prepare surfaces according to manufacturer instructions and workplace procedures
  • 2.3 Perform reworking on identified areas of product and check for conformity according to job specifications and typical quality measures
3. Complete rework process
  • 3.1 Clean, inspect and store equipment used for reworking according to equipment specifications for serviceable condition and storage, and according to workplace procedures
  • 3.2Inspect finished product for suitability for further processing, for customer delivery or for further reworking according to job specifications and reworking procedures
  • 3.3 Clean work area and apply waste management and recycling strategies
  • 3.4 Assemble and sort reworked products for delivery to other work sections
  • 3.5 Accurately record product data
4. Respond to process control variances
  • 4.1 Recognise process control variances and their causes
  • 4.2 Determine, prioritise and implement remedial and preventative actions based on identified issues and causes
  • 4.3 Accurately maintain records and logbooks
No information
No information
Replaces
State Code National Code Title Type
BAJ49 PMBFIN203 Repair product imperfections Unit of competency