Unit of competency Outline
Date retreived
22/07/2026 10:00 PM AWST
22/07/2026 10:00 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Perform table work
Perform table work
Unit of competency
National Code
LMTLG2003A
LMTLG2003A
State Code
W7382
W7382
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
17/10/2014
Field of Education
030199 - Manufacturing Engineering And Technology, N.e.c.
Original Release Date
17/10/2014
Nominal Hours
70
Description
This unit covers the skills and knowledge to make leather components and products using table production processes.
Notes
Elements and Performance Criteria
1 Prepare work pieces
- 1.1 Work bundle is received, checked and any follow up action assessed
- 1.2 Quality of received component parts is assessed
- 1.3 Work pieces are laid out in correct sequence in accordance with workplace procedures and specifications
2 Prepare workstation
- 2.1 Position self to achieve operator comfort and to minimise fatigue
- 2.2 Tools are cleaned and checked
- 2.3 Records are kept
3 Carry out bench work activities
- 3.1 Folding and turning operations are performed to specifications
- 3.2 Parts, panels and pieces are joined, as required
- 3.3 Adhesives are used safely and to achieve specifications
- 3.4 Other table work operations including punching, riveting and the application of studs are performed according to style and to achieve quality requirements, as required
- 3.5 Work is conducted according to OHS practices
4 Finish work
- 4.1 Finishing operations are performed
- 4.2 Components and products are checked against specifications
- 4.3 Faults are reported and returned for rework or repair in accordance with workplace procedures and quality measures
5 Despatch completed work
- 5.1 Component and products are bundled, stacked, stored or despatched
- 5.2 Production faults are recorded as required
- 5.3 Records are completed
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Tools may include
leather scissors
leather marker
beating hammer
turning bone
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
Finishing operations may include
clipping
sorting
spotting
attaching labels
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Legislative/regulatory requirements
All work must comply with relevant Federal and State or Territory legislative or regulatory requirements.
Tools may include
leather scissors
leather marker
beating hammer
turning bone
OHS practices
OHS practices must include hazard identification and control, risk assessment and implementation of risk reduction measures specific to the tasks described by this unit, and may include:
manual handling techniques
standard operating procedures
personal protective equipment
safe materials handling
taking of rest breaks
ergonomic arrangement of workplaces
following marked walkways
safe storage of equipment
housekeeping
reporting accidents and incidents
other OHS practices relevant to the job and enterprise
Finishing operations may include
clipping
sorting
spotting
attaching labels
The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, Required Skills and Knowledge, the Range Statement and the Assessment Guidelines for the Training Package.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
check work against ticket information and workplace standards
prepare workstation and work prior to commencing operations
use table-based processes to produce straight work
apply workplace health and safety policies in work operations, with particular reference to adhesives and use of tools
maintain accurate records
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Demonstrates skills and knowledge to:
check work against ticket information and workplace standards
prepare workstation and work prior to commencing operations
use table-based processes to produce straight work
apply workplace health and safety policies in work operations, with particular reference to adhesives and use of tools
maintain accurate records
Consistently applies skills and knowledge when:
organising work
completing tasks
identifying improvements
using workplace practices
using OHS practices
recording and reporting accidents and incidents
assessing operational readiness of equipment used and work processes
recognising and adapting to cultural differences in the workplace, including modes of behaviour and interactions
completing work systematically with attention to detail without damage to goods and equipment
Context and specific resources for assessment
Assessment may occur on the job or in an appropriately simulated environment and requires access to work areas, materials and equipment and to information on workplace practices and OHS practices.
Guidance information for assessment
This unit may be assessed independently or in combination with other relevant units.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AXP93 | LMTPRLG06AA | Perform table work - 1 | Unit of competency |
| AXP94 | LMTPRLG06BA | Perform table work - 2 | Unit of competency |
| AXP95 | LMTPRLG06CA | Perform table work - 3 | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAV35 | MSTLG2003 | Perform table work | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W375 | LMT30907 | Certificate III in Leather Production | Qualification |
| W363 | LMT21207 | Certificate II in Leather Production | Qualification |