Unit of competency Outline

Date retreived
23/07/2026 7:37 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Repair and touch up surfaces

Repair and touch up surfaces

Unit of competency
National Code
MSFFF3006
State Code
WI326
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
030117 - Furniture Polishing
Original Release Date
19/06/2014
Nominal Hours
42
Description
This unit of competency covers applying techniques to repair and touch up damaged surfaces.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work
  • 1.1 Workplace information, including materials application and safety information, and material safety data sheets (MSDS), is used to inform work practices
  • 1.2 Characteristics of the surface and the required surface coating are identified from work orders or instructions
  • 1.3 Processing and application techniques, time and safety requirements are identified and used for work planning
  • 1.4 Work health and safety (WHS) requirements, including ventilation requirements and personal protection needs, are observed throughout the work
  • 1.5 Tools, equipment and accessories are identified and checked for safe and effective operation for the surface coating task
2 Repair surfaces
  • 2.1 Surfaces are checked for contamination and correct preparation according to workplace procedures and standards
  • 2.2 Products with surface or other faults are identified and assessed
  • 2.3 Materials required for repair are selected and prepared
  • 2.4 Repairs are completed to manufacturer standards and/or industry practices
3 Prepare for application of materials
  • 3.1 Techniques for hand application of materials are identified and selected
  • 3.2 Coating materials required are identified and prepared for the surface coating task
  • 3.3 Trial applications of surface materials are made to check equipment operation, materials consistency and specified surface finish
  • 3.4 Faults are identified and workplace procedures for rectification are followed
4 Apply surface coating
  • 4.1 Surface coatings are applied according to job instructions, manufacturer specifications and workplace procedures
  • 4.2 Coated products are inspected and approved for suitability for further processing
  • 4.3 Products which do not meet quality specifications are recoated or tagged for further investigation
5 Clean work area and maintain equipment
  • 5.1 Equipment used is cleaned and inspected for serviceable condition and stored appropriately
  • 5.2 Unserviceable equipment is tagged, faults are identified and appropriate personnel are informed
  • 5.3 Work area, including painting locations, is cleaned and returned to approved condition
  • 5.4 Workplace records are completed
No information
No information
Replaces
State Code National Code Title Type
W8519 LMFFF3006B Repair and touch up surfaces Unit of competency
Replaced By
State Code National Code Title Type
OEL30 MSFFF3015 Repair and touch up surfaces Unit of competency
State Code National Code Title Type
J729 MSF30113 Certificate III in Furniture Finishing Qualification
J740 MSF31213 Certificate III in Piano Technology Qualification