Unit of competency Outline

Date retreived
23/07/2026 12:27 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Graft cuttings

Graft cuttings

Unit of competency
National Code
FPIFGM2212B
State Code
D5995
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
20/05/2011
State Implementation and Classification
Approved Date
04/08/2014
Field of Education
050301 - Horticulture
Original Release Date
04/08/2014
Nominal Hours
20
Description
This unit describes the outcomes required to prepare and graft cuttings on to a mature plant. The unit includes application of pre-planting treatments and nutritional careGeneral workplace legislative and regulatory requirements apply to this unit; however there are no specific licensing or certification requirements at the time of publicationThis unit replaces FPIFGM2212A Graft cuttings
Notes
Elements and Performance Criteria
1. Prepare cuttings
  • 1.1. Applicable occupational health and safety (OHS), environmental, legislative and organisational requirements relevant to grafting cuttings are identified and followed
  • 1.2. Site environmental protection measures are identified and adhered to in line with relevant legislation and regulations
  • 1.3. Work order is reviewed and checked as required with appropriate personnel
  • 1.4. Equipment appropriate to work requirements is selected and checked for operational effectiveness in line with manufacturer recommendations
  • 1.5. Parent plant is prepared and suitable method is applied to take the cutting appropriate to the species
  • 1.6. Correct conditioning and storage procedures appropriate to species requirements are identified and provided to maintain maximum viability of cuttings
  • 1.7. Communication with others is established and maintained in line with OHS requirements
2. Sort and select cuttings
  • 2.1. Organisational hygiene practices and procedures are identified and followed to maintain a contamination-free work area
  • 2.2. Work is undertaken using established safe operating practices in line with workplace procedures and environmental requirements
  • 2.3. Cuttings are visually assessed and selected for propagation in line with work order requirements
  • 2.4. Discarded cutting material is disposed of in line with workplace waste disposal guidelines and organisational requirements
3. Graft cuttings on to mature plant
  • 3.1. Mature plant is prepared for grafting and pre-planting treatment is applied using methods suitable to the species
  • 3.2. Handling methods are used that prevent damage to cuttings
  • 3.3. Grafting type is checked as appropriate to species type and identifying labels are applied in line with workplace procedures
  • 3.4. Nutrients and growing environment for grafted cuttings are provided and maintained appropriate to the species requirements
  • 3.5. Remedial action is taken as required to control pests and diseases in line with specified planting program
  • 3.6. Grafting process is recorded and reported to the appropriate personnel
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
OHS requirements:
are to be in line with applicable commonwealth, state or territory legislation and regulations, and organisational safety policies and procedures, and may include:
personal protective equipment and clothing
safety equipment
first aid equipment
fire fighting equipment
hazard and risk control
fatigue management
elimination of hazardous materials and substances
safe forest practices, including required actions relating to forest fire
manual handling including shifting, lifting and carrying
Environmental requirements may include:
legislation
organisational policies and procedures
workplace practices
Legislative requirements:
are to be in line with applicable commonwealth, state or territory legislation, regulations, certification requirements and codes of practice and may include:
award and enterprise agreements
industrial relations
Australian Standards
confidentiality and privacy
OHS
the environment
equal opportunity
anti-discrimination
relevant industry codes of practice
duty of care
Organisational requirements may include:
legal
organisational and site guidelines
policies and procedures relating to own role and responsibility
quality assurance
procedural manuals
quality and continuous improvement processes and standards
OHS, emergency and evacuation procedures
ethical standards
recording and reporting requirements
equipment use, maintenance and storage requirements
environmental management requirements (waste minimisation and disposal, recycling and re-use guidelines)
Environmental protection measures may include:
ground growth
canopy
general forest lean
wind speed and direction
fallen trees
density of trees
ground slope
soil and water protection
ground hazards and obstacles
contingencies for modifying operations during wet or other adverse weather conditions
hygiene of the area
relevant commonwealth, state or territory, and local legislation and regulations
Appropriate personnel may include:
supervisors
clients
colleagues
line management
Equipment may include:
hand-held tools, such as grafting or budding knife
secateurs
grafting tape
Communication may include:
verbal and non-verbal language
constructive feedback
active listening
questioning to clarify and confirm understanding
use of positive, confident and cooperative language
use of language and concepts appropriate to individual social and cultural differences
control of tone of voice
Disposing of may include:
recycling discarded cutting material
sending discarded cutting material that cannot be recycled to landfill
Nutrients may include:
chemicals
fertilisers
organic material
Growing environment may include:
heat
light
humidity
wind
sun
moisture
topography
rainfall
Remedial action may include:
removal of infected material
treatment with chemicals
Records and reports may include:
techniques used
resources used
timeframes
results
recommendations
and may be:
manual
a computer-based system
other appropriate organisational communication system
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to provide evidence that they can safely and efficiently take cuttings and prepare mature plants for grafting, graft cuttings, and maintain nutrient and growing environment requirements suitable to the plant species
Critical aspects for assessment and evidence required to demonstrate competency in this unit
The evidence required to demonstrate competency in this unit must be relevant to, and satisfy, all of the requirements of the elements of this unit and include demonstration of:
following applicable commonwealth, state or territory legislative and regulatory requirements and codes of practice relevant to grafting cuttings
following organisational policies and procedures relevant to grafting cuttings
using appropriate tools and equipment and maintaining a hygienic work environment
using appropriate methods and techniques to graft cuttings onto a mature plant and maintaining a growing environment suitable to the plant species
applying remedial treatments to plants as required
Context of and specific resources for assessment
Competency is to be assessed in the workplace or realistically simulated workplace
Assessment is to occur under standard and authorised work practices, safety requirements and environmental constraints
Assessment of required knowledge, other than confirmatory questions, will usually be conducted in an off-site context
Assessment is to follow relevant regulatory or Australian Standards requirements
The following resources should be made available:
workplace location or simulated workplace
materials and equipment relevant to undertaking work applicable to this unit
specifications and work instructions
Method of assessment
Assessment must satisfy the endorsed Assessment Guidelines of the FPI11 Training Package
Assessment methods must confirm consistency and accuracy of performance (over time and in a range of workplace relevant contexts) together with application of required knowledge
Assessment must be by direct observation of tasks, with questioning on required knowledge and it must also reinforce the integration of employability skills
Assessment methods must confirm the ability to access and correctly interpret and apply the required knowledge
Assessment may be applied under project-related conditions (real or simulated) and require evidence of process
Assessment must confirm a reasonable inference that competency is able not only to be satisfied under the particular circumstance, but is able to be transferred to other circumstances
Assessment may be in conjunction with assessment of other units of competency
The assessment environment should not disadvantage the candidate
Assessment practices should take into account any relevant language or cultural issues related to Aboriginality, gender or language backgrounds other than English
Where the participant has a disability, reasonable adjustment may be applied during assessment
Language and literacy demands of the assessment task should not be higher than those of the work role
Replaces
State Code National Code Title Type
S4658 FPIFGM2212A Graft cuttings Unit of competency
Replaced By
State Code National Code Title Type
AXK78 FWPFGM2212 Graft cuttings Unit of competency