Unit of competency Outline

Date retreived
22/07/2026 8:09 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Monitor output timber for optimum volume and value recovery

Monitor output timber for optimum volume and value recovery

Unit of competency
National Code
FWPSAW4206
State Code
OBM05
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
31/01/2020
View on TGA
State Implementation and Classification
Approved Date
29/05/2020
Field of Education
030305 - Materials Engineering
Original Release Date
29/05/2020
Nominal Hours
45
Description
This unit of competency describes the skills and knowledge required to monitor timber production to optimise volume and value of sawn timber. This includes working safely, monitoring timber production for volume, grade and size, and reporting on production outcomes and compliance with optimisation objectives.The unit applies to individuals who monitor output timber for optimum volume and value recovery in timber sawmills.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1 Review work order to determine job requirements and, where required, seek clarification from appropriate personnel
  • 1.2 Identify and apply workplace health and safety requirements, including use of personal protective equipment and safe manual handling techniques
  • 1.3 Identify, assess and take actions to mitigate risks and hazards associated with sawing operations
  • 1.4 Identify and implement workplace procedures for minimising waste material and maximising energy efficiency
2. Monitor timber production
  • 2.1 Confirm cutting pattern, product mix and optimisation objectives in relation to timber volume and value recovery
  • 2.2 Identify and monitor output data for timber volume, grade and size, noting any anomalies and taking corrective action as required to optimise volume and value of timber according to workplace procedures
  • 2.3 Monitor output timber for grade and size, noting any anomalies and taking corrective action as required to optimise the volume and value of timber according to workplace procedures
  • 2.4 Monitor equipment operation, recording faults and malfunctions and taking corrective action as necessary to optimise volume and value of timber according to workplace procedures
3. Report on optimisation
  • 3.1 Record optimisation data according to workplace procedures
  • 3.2 Compare production data with optimisation objectives
  • 3.3 Report production outcomes and compliance with optimisation objectives to an appropriate person
  • 3.4 Make recommendations based on evidence to improve production and optimisation outcomes
No information
No information
No information