Unit of competency Outline

Date retreived
22/07/2026 3:01 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Cut and form metal

Cut and form metal

Unit of competency
National Code
MSTTF2019
State Code
OEZ67
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
22/12/2022
View on TGA
State Implementation and Classification
Approved Date
03/07/2023
Field of Education
030717 - Plant And Machine Operations
Original Release Date
03/07/2023
Nominal Hours
60
Description
This unit describes the skills and knowledge required to cut prescribed lengths of metal bar stock and to bend the lengths into various shapes by hand or with the aid of formers.This unit applies to individuals working in accordance with pre-determined specifications and established procedures. No licensing or certification requirements exist at the time of publication. Relevant legislation, industry standards and codes of practice within Australia must be applied.
Notes
Elements and Performance Criteria
1. Prepare for cutting and forming metal
  • 1.1 Identify job and material requirements specifications from work specifications
  • 1.2 Identify and comply with work health and safety requirements
  • 1.3 Plan work to meet job requirements
  • 1.4 Accurately calculate required length of material based on specifications
  • 1.5 Select section material to meet specifications, and choose suitable length of material stock for cutting to minimise waste
  • 1.6 Identify and prepare required tools and equipment in accordance with job requirements and workplace procedures
2. Cut material
  • 2.1 Mark out cutting points on material and select appropriate cutting equipment
  • 2.2 Secure material to prevent movement using appropriate jigs or fixtures
  • 2.3 Use safety equipment in accordance with work health and safety requirements when operating cutting equipment
  • 2.4 Select and install consumables in accordance with manufacturer requirements
  • 2.5 Set and operate equipment in accordance with manufacturer instructions and workplace procedures
  • 2.6 Cut material to correct length and remove burrs using suitable technique
  • 2.7 Inspect cut sections to verify that size and condition meets specifications and workplace quality standards
3. Form material
  • 3.1 Identify required forming process and confirm safety and operational readiness of equipment
  • 3.2 Set former and place and secure metal section
  • 3.3 Use forming techniques to achieve required specification
  • 3.4 Descale or otherwise finish formed product after forming to meet specifications
  • 3.5 Inspect formed product and verify that it meets specifications and workplace quality standards
4. Maintain work area and equipment
  • 4.1 Label or tag completed product and complete documentation in accordance with workplace procedures
  • 4.2 Clean work area and store tools and electrical equipment in accordance with workplace procedures
  • 4.3 Follow workplace procedures for reuse, recycling and disposal of materials
  • 4.4 Clean tools and equipment and complete routine operator maintenance in accordance with workplace procedures and manufacturer instructions
No information
No information
Replaces
State Code National Code Title Type
BAU67 MSTTF2002 Cut, bend and shape metal Unit of competency
State Code National Code Title Type
BIZ0 MST20722 Certificate II in Apparel, Fashion and Textiles Qualification