Perform complex 4x4 operations

Unit of competency Outline

Date retreived
22/07/2026 4:50 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
FPIFGM3208B

State Code
D6004

TGA Status
Replaced

DTWD Status
Replaced

Current Release Number
1.00

Current Release Date
20/05/2011

View on TGA

State Implementation and Classification

Approved Date

25/06/2012

Field of Education

030515 - Automotive Vehicle Operations

Original Release Date

25/06/2012

Nominal Hours

Description

This unit describes the outcomes required to perform complex 4x4 operations, including operations over rugged terrain and water crossingsCompliance with licensing, legislative, regulatory or certification requirements may be required in various jurisdictionsThis unit replace FPIFGM3208A Perform complex 4x4 operations

Notes

Elements and Performance Criteria

1. Prepare for 4x4 operations

1.1. Applicable occupational health and safety (OHS), environmental, legislative and organisational requirements relevant to performing complex 4x4 operations are identified and followed
1.2. Type of water crossings and terrain are identified and assessed for safe operating conditions
1.3. Vehicle is selected appropriate to conditions and checked for operational effectiveness in line with manufacturer's specifications
1.4. 4x4 activities are planned in line with anticipated conditions
1.5. Hazards and risks associated with operations and surfaces are assessed in line with capability of operator and vehicle
1.6. Communication with others is established and maintained in line with OHS requirements

2. Negotiate water crossing

2.1. Entry and exit points for crossing are established and selected for current flow in line with risk assessment
2.2. Depth of water at intended crossing point is checked against indicators or activities
2.3. Gear/ratio for completion of crossing is selected without the need to change
2.4. Vehicle is prepared prior to commencing water crossing
2.5. Engine revolutions are kept constant without sudden acceleration or deceleration and bow wave is maintained
2.6. Brakes are dried off by gentle application while moving
2.7. Engine oils are checked for contamination, and differential and gear box oils are arranged to be checked after prolonged periods in water
2.8. Aircleaner elements are checked for water intrusion to assess air intake operational effectiveness

3. Operate vehicle in rugged terrain

3.1. Intended vehicle path is inspected prior to negotiation of rugged terrain
3.2. Correct gear/range is selected to negotiate terrain
3.3. Freewheel hubs are engaged and disengaged in line with driving conditions
3.4. Vehicle controls are set in line with manufacturer's specifications for operation in the surrounding terrain
3.5. Traction is maintained in line with requirements of the vehicle and the surrounding terrain
3.6. Chains are fitted to vehicle in line with manufacturer's specifications as required by terrain
3.7. Vehicle load is inspected, positioned and secured to maximise traction for 4x4 driving
3.8. Terrain is negotiated in line with requirements for specific driving conditions

No information

Replaces

State Code	National Code	Title	Type
S4669	FPIFGM3208A	Perform complex 4x4 operations	Unit of competency

Replaced By

State Code	National Code	Title	Type
WF827	FPIFGM3215	Perform complex 4x4 operations	Unit of competency