Unit of competency Outline

Date retreived
22/07/2026 11:55 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Service bicycle steering systems

Service bicycle steering systems

Unit of competency
National Code
AURBTD001
State Code
AXE42
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
14/04/2016
View on TGA
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to service bicycle steering systems. It involves preparing for the work, selecting and using specialist tools and equipment, inspecting, servicing and testing the bicycle steering system, and completing workplace processes and documentation. It applies to those working in the bicycle retail, service and repair industry.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare to service bicycle steering system
  • 1.1 Job requirements are determined from workplace instructions
  • 1.2 Condition of steering system is inspected for faults and worn or damaged components and overall condition using visual inspection methods and by comparing measurements against manufacturer specifications
  • 1.3 Hazards associated with the work are identified and risks are managed
  • 1.4 Materials, parts, tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
  • 1.5 Work area is prepared and service sequence, including post-service testing, is planned to avoid damage to bicycle, minimise waste and use time efficiently
2. Carry out service of steering system
  • 2.1 Tools and equipment are used according to workplace procedures and manufacturer specifications
  • 2.2 Bicycle steering system is serviced according to job requirements, manufacturer specifications, and safety and environmental requirements
  • 2.3 Operation of serviced steering system is tested through its full range and adjustments are made as required
  • 2.4 Results and quality issues are reported to authorised personnel as required
3. Complete work processes
  • 3.1 Final inspection is made to ensure work meets workplace expectations and bicycle is presented ready for use
  • 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
  • 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
  • 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WF051 AURBTD2001 Service bicycle steering systems Unit of competency
Replaced By
State Code National Code Title Type
OCK46 AURBTD101 Service bicycle steering systems Unit of competency