Unit of competency Outline

Date retreived
22/07/2026 11:34 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install timber shutters

Install timber shutters

Unit of competency
National Code
MSFBA3003
State Code
WI264
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
10/12/2013
View on TGA
State Implementation and Classification
Approved Date
19/06/2014
Field of Education
040311 - Carpentry And Joinery
Original Release Date
19/06/2014
Nominal Hours
30
Description
This unit of competency covers installation of timber shutters. It applies in an on-site residential or commercial environment.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify products, fittings and attachments for installation
  • 1.1 Type of timber shutter to be installed is identified
  • 1.2 Installation hardware, tools and equipment are identified from work instructions and site inspection conducted in consultation with customer
  • 1.3 Customer is consulted to determine day and time for installation
2 Plan installation process
  • 2.1 Work health and safety (WHS) requirements and personal protection needs are observed throughout the work
  • 2.2 Work order is read and interpreted and work sequence is planned in a logical order to suit job
  • 2.3 Worksite is checked to determine access and special equipment requirements
  • 2.4 Product to be installed is laid out and checked against work order
  • 2.5 Product to be installed is protected and transported to worksite without damage
3 Install timber shutters
  • 3.1 Public and property is protected, if necessary, and fixing hardware is installed to manufacturer specifications
  • 3.2 Timber shutter is installed to manufacturer specifications
4 Complete the installation
  • 4.1 Operation of product is tested within limitations of normal operation and adjusted if necessary
  • 4.2 Customer is shown correct use of product
5 Clean work area
  • 5.1 Tools and equipment are cleaned and stored according to workplace practices
  • 5.2 Work area is cleaned and left in a safe condition
  • 5.3 Waste and scrap are removed and disposed of in accordance with workplace practices and environmental legislation covering disposal of industrial waste or recycled, as appropriate, following workplace practices
6 Settle payment
  • 6.1 Invoice is issued to customer and payment received and receipted
  • 6.2 Workplace documentation is completed
No information
No information
Replaced By
State Code National Code Title Type
OBP15 MSFBA3021 Assemble louvre shutters Unit of competency
OBP22 MSFBA3015 Install louvre shutters Unit of competency
State Code National Code Title Type
J737 MSF30913 Certificate III in Blinds, Awnings, Security Screens and Grilles Qualification