Unit of competency Outline

Date retreived
22/07/2026 8:24 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Conduct basic tests and analyses of telecommunications copper cabling

Conduct basic tests and analyses of telecommunications copper cabling

Unit of competency
National Code
ICTTEN316
State Code
OBA43
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
30/08/2019
View on TGA
State Implementation and Classification
Approved Date
27/11/2019
Field of Education
031309 - Communications Equipment Installation And Maintenance
Original Release Date
27/11/2019
Nominal Hours
45
Description
This unit describes the skills and knowledge required to test and analyse telecommunications copper cabling using a variety of telecommunications industry test equipment.This unit applies to technicians who conduct basic tests and telecommunications copper cabling analysis.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Determine cable type/s and applications in use in telecommunications system
  • 1.1 Identify and document applications in use in telecommunications system according to relevant standards
  • 1.2 Identify cables in use within a telecommunications system according to relevant standards
  • 1.3 Assess balanced/unbalanced nature of type of cable system in use
2. Determine testing parameters and calibrate devices
  • 2.1 Select most appropriate testing device and methodology for cable type
  • 2.2 Outline testing parameters to be used for task
  • 2.3 Locate and isolate alternative energy supply sources
  • 2.4 Determine components to be tested
  • 2.5 Resolve implications of system interruptions and methods for live testing with minimum system disruption
  • 2.6 Calibrate test devices according to manufacturer and enterprise requirements
3. Conduct copper cable test/s and record results
  • 3.1 Connect test devices to cable system
  • 3.2 Perform and record test results
  • 3.3 Save and retrieve test results as required
  • 3.4 Review adverse findings and escalate according to enterprise policy and procedures
4. Report test results
  • 4.1 Analyse and record critical test data
  • 4.2 Develop recommendations based on test data analysis
  • 4.3 Write up report of test results
  • 4.4 Submit report to customer and obtain sign-off
No information
No information
No information