Unit of competency Outline

Date retreived
22/07/2026 8:03 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install and maintain low voltage underground services

Install and maintain low voltage underground services

Unit of competency
National Code
UETTDRIS55
State Code
OBH63
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
25/09/2019
View on TGA
State Implementation and Classification
Approved Date
04/12/2019
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
04/12/2019
Nominal Hours
36
Description
This unit involves the skills and knowledge required to install and maintain low voltage (LV) underground services in the electricity supply industry (ESI).
It includes the installation, maintenance and connection of low voltage underground service lines and associated equipment between the connection point and the point of supply.
It also includes the repair and replacement of service cables, service fuses and the replacement and repair of service hardware and the identification and rectification of faults. It also covers insulation, voltage, phase rotation and polarity testing.
The application of the skills and knowledge described in this unit may require a licence/registration to practice in the workplace.
Other conditions may apply under State and Territory legislative and regulatory licensing requirement which must be confirmed prior to commencing this unit.
Notes
Elements and Performance Criteria
1 Prepare for installation and maintenance of LV underground services and associated equipment
  • 1.1 Work schedules, construction plans, drawings, workplace procedures and material lists are received and confirmed
  • 1.2 Job requirements and workplace procedures are identified and communicated with relevant personnel
  • 1.3 Work health and safety (WHS)/occupational health and safety (OHS), environmental and workplace procedures for the installation and maintenance of LV underground services and associated equipment are obtained and confirmed for the purposes of the work to be performed
  • 1.4 Work is prioritised and sequenced for completion within acceptable timeframes following consultation with relevant personnel and in accordance with workplace procedures
  • 1.5 Hazards are identified, WHS/OHS risks assessed and control measures identified in accordance with workplace procedures
  • 1.6 Relevant work permits are obtained, understood and signed in accordance with workplace procedures
  • 1.7 Plant, equipment, tools and personal protective equipment (PPE) required for work are identified, obtained and confirmed in working order
  • 1.8 Worksite is prepared to minimise risk, damage to property, commerce and individuals in accordance with workplace procedures
  • 1.9 Traffic management plan is confirmed as being applied in accordance with workplace procedures
2 Carry out installation and maintenance of LV underground services and associated equipment
  • 2.1 WHS/OHS, sustainable energy and environmental principles and practices are monitored and followed to reduce incidents in accordance with workplace procedures
  • 2.2 Requirements for lifting and/or climbing and/or working at heights and the use of power tools/equipment are followed in accordance with workplace procedures
  • 2.3 Installation and maintenance of LV underground services and associated equipment are performed in agreed timeframes, to quality standards with a minimum of waste in accordance with workplace procedures
  • 2.4 LV underground services and associated equipment are installed in accordance with job requirements, work permits and workplace procedures
  • 2.5 Maintenance, including repair and/or replacement of LV services and associated equipment, is assembled in accordance with construction plans, drawings and workplace procedures
  • 2.6 Unplanned events are responded to in accordance with workplace procedures
  • 2.7 Quality checks of work are undertaken in accordance with workplace procedures
3 Complete installation and maintenance of LV underground services and associated equipment
  • 3.1 Completed work is checked against work schedule, construction plans and drawings for compliance and anomalies are reported in accordance with workplace procedures
  • 3.2 WHS/OHS and environmental incidents are reported in accordance with workplace procedures, as required
  • 3.3 Worksite is rehabilitated, cleaned up and made safe in accordance with workplace procedures
  • 3.4 Tools, equipment and surplus resources and materials are, where appropriate, are cleaned, checked and returned to storage in accordance with workplace procedures
  • 3.5 Relevant work permits are signed off and the LV services and associated equipment are returned to service in accordance with workplace procedures
  • 3.6 Work records, reports and/or documentation are completed in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WD681 UETTDRIS55A Install and maintain low voltage underground services Unit of competency
Replaced By
State Code National Code Title Type
ODN23 UETDRIS011 Install and maintain low voltage underground services Unit of competency