Unit of competency Outline

Date retreived
22/07/2026 6:28 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Contribute to the design of hydronic systems

Contribute to the design of hydronic systems

Unit of competency
National Code
MEM23147
State Code
OEW04
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
19/12/2022
View on TGA
State Implementation and Classification
Approved Date
19/04/2023
Field of Education
030703 - Industrial Engineering
Original Release Date
19/04/2023
Nominal Hours
35
Description
This unit of competency defines the knowledge and skills required to contribute to the design of hydronic systems or to undertake the complete design for less complex systems. It includes analysis of characteristics of water flow in a pipework system, and selection and sizing of pipes, fittings, suitable pumps, and associated fittings and valves.The unit applies to heating, ventilation, air conditioning and refrigeration (HVACR) technicians in manufacturing, servicing and maintenance enterprises required to undertake design work on hydronic systems.It applies to design work undertaken as part of a design team comprising engineers and other technicians and to individual design tasks within the scope of the technician’s skill and knowledge.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare design specification
  • 1.1 Obtain and implement work health and safety (WHS) and environmental requirements for the work area
  • 1.2 Identify the essential elements of a hydronic system to meet client design brief
  • 1.3 Consult with appropriate personnel to ensure that work is coordinated effectively with others
  • 1.4 Obtain equipment and resources needed for the task in accordance with organisational procedures and check for correct operation and safety
2. Design system
  • 2.1 Select a hydronic system design to meet the client requirements
  • 2.2 Plan design development work to meet scheduled timelines
  • 2.3 Check system design draft for compliance with the design brief, regulatory requirements and environmental standards
  • 2.4 Provide solutions to unplanned situations consistent with organisational procedures
3. Analyse and adjust system performance
  • 3.1 Apply knowledge of hydronic system operating parameters to analytical solutions to system design
  • 3.2 Analyse system performance under variable conditions and adjust component selection to meet performance criteria
  • 3.3 Determine fulfilment of required capacity under full and partial load conditions using appropriate resources
4. Validate system design
  • 4.1 Verify final design using organisational procedures for compliance and regulatory requirements
  • 4.2 Document final system design for client approval, using appropriate equipment to industry standards
No information
No information
Replaces
State Code National Code Title Type
WE960 MEM23147A Contribute to the design of hydronic systems Unit of competency
State Code National Code Title Type
BIW5 MEM60122 Advanced Diploma of Engineering Qualification