Unit of competency Outline

Date retreived
22/07/2026 7:09 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Coordinate set up and operation of timber finger jointing line

Coordinate set up and operation of timber finger jointing line

Unit of competency
National Code
FWPCOT3336
State Code
OFD17
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
25/01/2023
View on TGA
State Implementation and Classification
Approved Date
19/05/2023
Field of Education
030717 - Plant And Machine Operations
Original Release Date
19/05/2023
Nominal Hours
35
Description
This unit of competency describes the skills and knowledge required to coordinate finger jointing operations, including planning schedules for operators, setting up equipment for production runs, resolving processing problems and coordinating equipment shutdown and maintenance.The unit applies to individuals who coordinate the production of finger jointed timber in a timber processing or manufacturing facility.All work must be carried out to comply with workplace procedures, according to state/territory health and safety regulations, legislation and standards that apply to the workplace.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Establish finger jointing schedule
  • 1.1 Access data in production orders on grades, quantities, cross-sections and end use to plan finger jointing schedule
  • 1.2 Develop and document finger jointing schedule to ensure optimum production outcomes
  • 1.3 Communicate finger jointing schedule to operators according to workplace procedures
2. Prepare for finger jointing operations
  • 2.1 Review work order and specifications, and check with appropriate personnel as required
  • 2.2 Review workplace health and safety procedures, including use of personal protective equipment, equipment lock-out and safe manual handling techniques
  • 2.3 Confirm legislation, standards and codes of practice relevant to timber jointing operations
  • 2.4 Identify and assess hazards and take actions to mitigate risks related to operating finger jointing machines
  • 2.5 Identify workplace environmental protection practices and/or procedures for minimising and disposing of waste material, cleaning tools and equipment, and maximising energy efficiency
3. Coordinate set-up of finger jointing line
  • 3.1 Check finger jointing equipment for safety and operational effectiveness, and adjust set-up to meet production requirements
  • 3.2 Select, check and prepare cutters to suit finger profile and timber cross-sections
  • 3.3 Set feed rates, guides, conveyors, glue spreader and curing controls to satisfy finger profile, timber cross-section characteristics and glue requirements
  • 3.4 Coordinate cutting of trial timber joints and check finger profiles against specifications
  • 3.5 Coordinate machining of trial cleat and join and test for strength and appearance
  • 3.6 Accept or reject trialled timber according to workplace procedures and quality standards
  • 3.7 Resolve any machining problems and make final adjustments to equipment set-up according to workplace procedures and production requirements
4. Coordinate and monitor operation of finger jointing line
  • 4.1 Coordinate start-up of finger jointing line in conjunction with operators according to workplace procedures and manufacturer specifications
  • 4.2 Monitor finger jointing operation to ensure safety, product quality and output
  • 4.3 Identify routine processing and equipment faults and resolve or report to appropriate personnel according to workplace procedures
  • 4.4 Record and report production outcomes according to workplace procedures
5. Coordinate shutdown and maintenance
  • 5.1 Coordinate finger jointing line shutdown with operators according to workplace health and safety procedures
  • 5.2 Assist maintenance personnel to identify and resolve equipment faults
  • 5.3 Plan and coordinate routine maintenance of finger jointing equipment according to workplace procedures and maintenance schedules
No information
No information
Replaces
State Code National Code Title Type
OBM41 FWPCOT3288 Set up, operate and maintain finger jointing machines Unit of competency