Unit of competency Outline
Date retreived
22/07/2026 7:57 PM AWST
22/07/2026 7:57 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Service electric power-assisted bicycles
Service electric power-assisted bicycles
Unit of competency
National Code
AURBTR001
AURBTR001
State Code
AXE34
AXE34
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
13/07/2016
Field of Education
030599 - Automotive Engineering And Technology, N.e.c.
Original Release Date
13/07/2016
Nominal Hours
20
Description
This unit describes the performance outcomes required to service electric power-assisted bicycle systems and components. It involves preparing for the work, selecting and using specialist tools and equipment, inspecting the bicycle condition, interpreting manufacturer specifications, performing routine maintenance and testing on electric bicycle components, and completing workplace processes and documentation. It applies to those working in the bicycle retail, service and repair industry. Electric power-assisted bicycles are throttle and pedal assist sensor (PAS) bicycles with 250 watts rated power at the wheel. Licensing, legislative, regulatory or certification requirements may apply to this unit in some jurisdictions. Users are advised to check with the relevant regulatory authority.
Notes
Elements and Performance Criteria
1. Prepare to service electric power-assisted bicycle
- 1.1 Job requirements are determined from workplace instructions
- 1.2 Manufacturer specifications and workplace procedures are accessed and interpreted
- 1.3 Tools and equipment, including personal protective equipment (PPE), are selected and checked for serviceability
- 1.4 Hazards associated with the work are identified and risks are managed
- 1.5 Work area is prepared and service sequence planned to avoid damage to bicycle, minimise waste and use time efficiently
2. Carry out service of bicycle
- 2.1 Condition of bicycle is inspected for faults and worn, non-serviceable or damaged parts according to workplace procedures
- 2.2 Bicycle components needing repair, replacement or maintenance are identified
- 2.3 Service options and techniques are identified and confirmed
- 2.4 Routine servicing and maintenance of bicycle are carried out according to service plan and safety and environmental requirements
- 2.5 Testing and operation checks are carried out on serviced bicycle according to manufacturer specifications, and adjustments are made as required
- 2.6 Results and quality issues are reported to authorised personnel as required
3. Complete work processes
- 3.1 Bicycle is cleaned, final inspection is made to ensure work meets workplace expectations, and bicycle is presented ready for use
- 3.2 Work area is cleaned, waste and non-recyclable materials are disposed of, and recyclable material is collected and stored
- 3.3 Tools and equipment are checked, reported if faulty, and stored according to workplace procedures
- 3.4 Workplace documentation is processed according to workplace procedures
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| WF062 | AURBTR3001 | Service electric power assist bicycles | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OCK35 | AURBTR101 | Inspect and service electric power-assisted bicycles | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| BAE5 | AUR30216 | Certificate III in Bicycle Workshop Operations | Qualification |