Unit of competency Outline

Date retreived
22/07/2026 5:15 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install or replace super-structure members

Install or replace super-structure members

Unit of competency
National Code
RIICTB305E
State Code
OCX40
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
25/01/2021
View on TGA
State Implementation and Classification
Approved Date
18/06/2021
Field of Education
030901 - Construction Engineering
Original Release Date
18/06/2021
Nominal Hours
40
Description
This unit describes the skills and knowledge required to install or replace super-structure members in civil construction including installing and dismantling temporary supports, fitting new members and applying durability treatments to facilitate installation or replacement. It applies to those working in operational roles. They generally work under minimal supervision to undertake a broad range of tasks in varied work contexts, using some discretion and judgement in selecting equipment, services or contingency measures.Licensing, legislative and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Relevant information must be sourced prior to application of the unit. Users must check requirements with relevant body before applying the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to install or replace super-structure members
  • 1.1 Obtain, interpret and confirm work instructions
  • 1.2 Access, interpret and apply documentation required to install or replace super-structure members and confirm work activity is compliant
  • 1.3 Obtain and interpret emergency procedures, and identify steps required to respond to emergencies
  • 1.4 Select and wear personal protective equipment according to site requirements
  • 1.5 Confirm and identify requirements for complying with environmental protection, safety and traffic management signage requirements
  • 1.6 Identify, address and report environmental issues, potential hazards and risks
  • 1.7 Select plant, tools and equipment to carry out tasks and check for faults
  • 1.8 Identify, confirm, and locate materials required for work application
2. Install temporary supports
  • 2.1 Locate and level bed logs according to job requirements
  • 2.2 Bolt temporary headers to girders
  • 2.3 Position toms and jacks on bed logs according to job requirements
  • 2.4 Install temporary bracing according to job requirements
  • 2.5 Loosen existing bolts to allow movement and access
  • 2.6 Jack structure to allow removal of defective part according to job requirements
3. Install and secure members
  • 3.1 Remove defective members according to job requirements
  • 3.2 Measure and prepare members for installation according to job requirements
  • 3.3 Fit new members according to job requirements
  • 3.4 Apply durability treatments to new members
  • 3.5 Install connectors to new super-structure members according to job requirements
  • 3.6 Remove temporary supports after new members are secured
  • 3.7 Remove temporary headers and bed logs and return bridge to its settle point
4. Conduct clean-up activities
  • 4.1 Clear work area and dispose of or recycle materials according to site requirements
  • 4.2 Clean, check, perform maintenance on and store plant, tools and equipment according to manufacturer specifications and site requirements
No information
No information
Replaces
State Code National Code Title Type
WH169 RIICTB305D Install or replace super-structure members Unit of competency
State Code National Code Title Type
BGL0 RII30920 Certificate III in Civil Construction Qualification