Unit of competency Outline

Date retreived
22/07/2026 9:59 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Maintain sealed roads

Maintain sealed roads

Unit of competency
National Code
RIICRC304D
State Code
WH120
TGA Status
Replaced
DTWD Status
Transition (Replaced)
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
27/05/2014
Field of Education
030901 - Construction Engineering
Original Release Date
27/05/2014
Nominal Hours
24
Description
This unit describes a participant’s skills and knowledge required to maintain sealed roads in Civil Construction.This unit is appropriate for those working in operational roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare work to maintain sealed roads
  • 1.1 Access, interpret and apply sealed roads maintenance documentation and ensure the work activity is compliant
  • 1.2 Obtain, read, interpret, clarify and confirm work requirements
  • 1.3 Identify and address potential risks, hazards and environmental issues, and implement control measures
  • 1.4 Select and wear correct personal protective equipment appropriate for work activities
  • 1.5 Identify, obtain, confirm and implement signage and barrier requirements
  • 1.6 Select and check for faults all plant, tools and equipment to carry out tasks
  • 1.7 Locate stockpile area in proximity to the job site
2. Store, prepare and transport materials
  • 2.1 Store and maintain materials in quantity and specified condition for requirements of regular maintenance program
  • 2.2 Prepare materials in accordance with specified mix
  • 2.3 Load, transport and unload materials in a safe manner to minimise spillage and water
3. Repair damaged or wearing surface and edges
  • 3.1 Identify faults in roads and pavements and apply appropriate repair method
  • 3.2 Remove water and loose material from damaged section
  • 3.3 Trim section to provide adequate support to repair material
  • 3.4 Prepare base and sides of sections to ensure bonding of repair material in accordance with specification
  • 3.5 Place material and compact to specifications maintaining alignment of surface
4. Repair pavement failures
  • 4.1 Remove water and loose material
  • 4.2 Excavate failed area to create a firm base
  • 4.3 Trim edges to ensure adequate adhesion of repair material
  • 4.4 Place and compact material to specification maintaining alignment of surface
5. Repair and seal surface cracks
  • 5.1 Identify cracks and surface drainage conditions to determine appropriate repair and sealing process
  • 5.2 Clear cracks of foreign materials
  • 5.3 Apply sealant to cracks and finish
6. Clean up
  • 6.1 Clear work area and dispose of or recycle materials
  • 6.2 Protect storm water systems by clearing debris and loose material
  • 6.3 Clean, check, maintain and store plant, tools and equipment
No information
No information
Replaces
State Code National Code Title Type
WB723 RIICRC304A Maintain sealed roads Unit of competency
Replaced By
State Code National Code Title Type
OCY63 RIICRC304E Maintain sealed roads Unit of competency
State Code National Code Title Type
BFA8 RII30919 Certificate III in Civil Construction Qualification
AZB0 RII30915 Certificate III in Civil Construction Qualification