Unit of competency Outline

Date retreived
22/07/2026 2:55 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Produce profile sanding shoes and wheels

Produce profile sanding shoes and wheels

Unit of competency
National Code
FWPWPP3225
State Code
AXJ20
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
13/05/2016
View on TGA
State Implementation and Classification
Approved Date
05/10/2016
Field of Education
030705 - Toolmaking
Original Release Date
05/10/2016
Nominal Hours
15
Description
This unit of competency describes the outcomes required to produce profile sanding shoes and wheels that match the product profile to be sanded.The unit applies to production technicians and operators that produce profile sanding shoes and wheels in a forest and wood products factory setting.Licensing, legislative, regulatory, or certification requirements apply to this unit in some states and territories at the time of publication, and may differ according to jurisdiction
Notes
Elements and Performance Criteria
1. Prepare for production.
  • 1.1 Review and check work order with appropriate personnel.
  • 1.2 Identify hazards and control risk in the work area according to work health and safety (WHS) requirements.
  • 1.3 Retrieve from stock, type and quantity of blanks for shoes and wheels to be produced.
  • 1.4 Conduct pre-start checks on equipment in line with manufacturer's recommendations and site requirements.
  • 1.5 Plan production process in line with site procedures.
  • 1.6 Communicate plan with others as required, to ensure safety and production requirements are met, in line with site procedures.
2. Produce shoes and wheels.
  • 2.1 Produce template from tin or other metal plate to match profile.
  • 2.2 Position shoe or wheel in machine and shape in line with template, stopping regularly to check shaping with template.
  • 2.3 Label wheels or shoes to follow profile.
  • 2.4 Install wheels or shoes into profile sander in preparation for profile sanding operations.
  • 2.5 Reject and dispose of templates with defects in line with site procedures and environmental requirements.
  • 2.6 Record and report production process and equipment faults to appropriate personnel.
3. Conduct operator maintenance.
  • 3.1 Follow equipment lock-out procedures in line with site procedures.
  • 3.2 Check and maintain condition of shoe or wheel shaping equipment.
  • 3.3 Check shaper cutters for blunt or damaged condition and sharpen as required.
  • 3.4 Clean tool room and clear of waste in line with site procedures.
No information
No information
Replaces
State Code National Code Title Type
D6140 FPIWPP3225B Produce profile sanding shoes and wheels Unit of competency
State Code National Code Title Type
BAL3 FWP30416 Certificate III in Wood Panel Products Qualification