Unit of competency Outline

Date retreived
23/07/2026 3:35 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install and maintain motor vehicle instrumentation sensors and transmitters

Install and maintain motor vehicle instrumentation sensors and transmitters

Unit of competency
National Code
AUMATR002
State Code
WH924
TGA Status
Deleted
DTWD Status
Deleted
Current Release Number
1.00
Current Release Date
10/01/2014
View on TGA
State Implementation and Classification
Approved Date
11/03/2014
Field of Education
030505 - Automotive Electrics And Electronics
Original Release Date
11/03/2014
Nominal Hours
25
Description
This unit describes the performance outcomes required to install, adjust and maintain instrumentation sensors and transmitters used to gather data for development purposes.It applies to those in an automotive and related component manufacturing environment.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Identify sensors, transmitters and final control elements
  • 1.1 Workplace requirements relevant to the use of sensors, transmitters and final control elements are identified with appropriate personnel
  • 1.2 Instructions and work plans are identified and interpreted
  • 1.3 Specifications from data sheets, circuit diagrams and engineering drawings are determined
  • 1.4 Sensors, transmitters and final control elements are selected and prepared, and installation is planned and documented
2. Install sensors, transmitters and final control elements
  • 2.1 Equipment is prepared for installation
  • 2.2 Equipment is installed
  • 2.3 Test is set up to determine correct calibration, operation and data feed
3. Maintain and diagnose faults with sensors, transmitters and final control elements
  • 3.1 Preventative maintenance schedules are implemented
  • 3.2 Periodic tests to ensure continued integrity of data are undertaken
  • 3.3 Sample data is viewed periodically for obvious irregularities and unexplained aberrations
4. Complete fault documentation and plan corrective action
  • 4.1 Operation of sensors, transmitters and final control elements is monitored and assessed against predetermined specifications and manufacturer’s technical data
  • 4.2 Fault conditions are identified, localised and monitored
  • 4.3 Faults are documented and reported to appropriate personnel
5. Restore equipment and finalise housekeeping
  • 5.1 Equipment is recovered, and checked for serviceability and calibration
  • 5.2 Serviceable equipment is returned to store for future use
  • 5.3 Unserviceable equipment is sent for repair or disposal according to workplace procedures
  • 5.4 Workplace documentation and test results are completed
No information
No information
No information
State Code National Code Title Type
J831 AUM40113 Certificate IV in Automotive Manufacturing Qualification