Unit of competency Outline

Date retreived
22/07/2026 8:03 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Build stone veneer walls

Build stone veneer walls

Unit of competency
National Code
CPCCST3012
State Code
OCP45
TGA Status
Current
DTWD Status
Approved
Current Release Number
2.00
Current Release Date
24/12/2024
View on TGA
State Implementation and Classification
Approved Date
01/06/2021
Field of Education
040309 - Bricklaying And Stonemasonry
Original Release Date
01/06/2021
Nominal Hours
40
Description
This unit specifies the skills and knowledge required to build single leaf stone block face walls to a metal or timber wall frame construction. This unit applies to stonemasons who work independently, in a team or under supervision to build stone veneer walls relating to stonemasonry work on a new or existing structure.A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without needing close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCWHS1001Prepare to work safely in the construction industrymeets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Prepare for work.
  • 1.1 Read, interpret and apply stone veneer construction requirements from current plans, specifications, standards and codes.
  • 1.2 Follow relevant information from workplace procedures, workplace safety and environmental documentation.
  • 1.3 Use measurements and formulas to calculate material quantities.
  • 1.4 Determine job priorities and sequence job tasks in consultation with others on site.
  • 1.5 Identify potential hazards and implement control measures.
  • 1.6 Select and check condition of plant, equipment and tools and report damage or faults to relevant person.
  • 1.7 Check conformity of materials against the job requirements.
2 Set out stone veneer work.
  • 2.1 Select, fit correctly and use personal protective equipment (PPE) appropriate for job.
  • 2.2 Identify structural details of stone veneer construction from plans and specifications.
  • 2.3 Establish overall height and levels from datum.
  • 2.4 Set out stonework dimensions and bond and mark on footing.
  • 2.5 Set out door and window openings, stone gauge and damp proof course (DPC).
3 Construct base.
  • 3.1 Select, blend and place materials in preparation for the work.
  • 3.2 Mix mortar for consistency and job requirements and place on mortar boards ready for use.
  • 3.3 Lay base stonework level and plumb to set out marks.
4 Construct stone veneer walls
  • 4.1 Check structural frame for plumb, straight and no protrusions to maintain consistent cavity size.
  • 4.2 Install reflective foil to meet building code and Australian standards.
  • 4.3 Lay stone masonry work installing DPC and flashings, ventilation, weep holes and fix wall ties to framework.
  • 4.4 Construct opening and install flashings maintaining clean cavity from mortar dropping and bridging.
  • 4.5 Set out, erect, stabilise and brace work platform to workplace safety requirements.
  • 4.6 Install lintels and head flashings to openings.
  • 4.7 Finish stone veneer walls level, plumb and parallel to eaves height.
  • 4.8 Locate and form control joints and stone work reinforcing as specified.
  • 4.9 Cut and lay sill bricks to a line as specified.
5 Rake and rule joints.
  • 5.1 Remove excess mortar from stonework.
  • 5.2 Rake or rule joints to specified profile and depth.
  • 5.3 Clean face of stonework prior to mortar drying.
6 Clean up
  • 6.1 Clear the work area, and dispose of, reuse or recycle materials following workplace and environmental requirements.
  • 6.2 Clean tools and equipment, check for serviceability and report damage or faults.
  • 6.3 Store and secure tools and equipment following workplace procedures.
No information
No information
Replaces
State Code National Code Title Type
W9567 CPCCST3012A Build stone veneer walls Unit of competency
State Code National Code Title Type
BGE7 CPC32320 Certificate III in Stonemasonry Qualification