Unit of competency Outline

Date retreived
24/07/2026 7:44 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Remove orthopaedic devices

Remove orthopaedic devices

Unit of competency
National Code
HLTCT407C
State Code
D5848
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
25/03/2011
View on TGA
State Implementation and Classification
Approved Date
02/08/2011
Field of Education
061799 - Rehabilitation Therapies, N.e.c.
Original Release Date
02/08/2011
Nominal Hours
50
Description
DescriptorThis unit of competency describes the skills and knowledge required to remove orthopaedic devices. Orthopaedic devices include both braces and splints that can be either prefabricated and/or customised
Notes
Elements and Performance Criteria
1. Prepare to remove orthopaedic devices
  • 1.1 Assemble and check equipment for removing orthopaedic devices to ensure that it is in clean and in working order
  • 1.2 Receive request to remove of orthopaedic device and if in doubt confirm request with relevant personnel
  • 1.3 Assess client's condition and identify precautions or potential complications associated with the removal of orthopaedic device
  • 1.4 Explain procedure to client and obtain client consent/agreement
  • 1.5 Provide the client with opportunities to ask questions and discuss areas of concern
  • 1.6 Meet the comfort and safety needs of the client and applicator
  • 1.7 Review condition of the wound and pin site and refer to relevant personnel as required
2. Remove orthopaedic device
  • 2.1 Identify client's specific needs in relation to the removal of orthopaedic device
  • 2.2 Remove the orthopaedic device according to instructions and to meet the client's needs
  • 2.3 Meet the comfort and safety needs of the client
  • 2.4 Assess the client's condition and identify the need for referral for immediate review by medical practitioner
  • 2.5 Complete documentation
3. Undertake post modification procedures
  • 3.1 Clean client at completion of procedure
  • 3.2 Ensure the Neurovascular status of limb is within normal limits
  • 3.3 Provide verbal advice to client and carer for the care of the limb until next appointment with medical specialist
  • 3.4 Arrange appropriate support for the client
4. Clean working environment
  • 4.1 Dispose of waste in accordance with waste management policies
  • 4.2 Clean equipment accordance with manufacturer's specifications and stored safely
  • 4.3 Clean work surfaces in accordance with infection control guidelines
No information
No information
Replaces
State Code National Code Title Type
C9152 HLTCT407B Remove orthopaedic devices Unit of competency
Replaced By
State Code National Code Title Type
WD104 HLTCT407D Remove orthopaedic devices Unit of competency
No information