Convert plastic film

Unit of competency Outline

Date retreived
22/07/2026 9:23 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Unit of competency

National Code
PMBPROD333

State Code
BAI53

TGA Status
Deleted

DTWD Status
Deleted

Current Release Number
1.00

Current Release Date
22/06/2016

View on TGA

State Implementation and Classification

Approved Date

05/08/2016

Field of Education

030305 - Materials Engineering

Original Release Date

05/08/2016

Nominal Hours

Description

This unit of competency covers the skills and knowledge required to operate and adjust film converting processes to produce product.This unit of competency applies to experienced operators who are required to start up and shut down film converting equipment, monitor equipment operation, establish a stable process, make adjustments to remedy faults and non-conformity and solve problems within area of responsibility.This unit of competency applies to experienced operators demonstrating theoretical and technical knowledge and well developed skills in situations that require some discretion and judgement. The advanced operator may work alone or as a member of a team or group and will work in liaison with other shift team members, team leader and supervisor, as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.

Notes

Elements and Performance Criteria

1 Plan own work requirements

1.1 Identify equipment and processes used for production process and upstream and downstream operations from production plan or request
1.2 Identify materials required, including additives if appropriate
1.3 Recognise hazards and follow appropriate hazard control/minimisation methods
1.4 Identify and check emergency stops, guards and controls
1.5 Identify requirements for materials, quality, production and equipment checks
1.6 Identify materials, waste management and housekeeping needs

2 Check film conversion process set-up

2.1 Determine equipment requirements
2.2 Set process to specifications as required
2.3 Check film conversion equipment settings and adjustments are as required
2.4 Check materials are correct
2.5 Discard, or make adjustments to the process for, non-conforming materials
2.6 Set up date, batch and materials markings to specifications, as required
2.7 Complete other pre-start checks in accordance with procedures

3 Operate and make adjustments as required to the film conversion process

3.1 Operate film conversion equipment, noting key variables
3.2 Monitor controls/displays/terminals for production/process data
3.3 Monitor product/process quality in accordance with procedures
3.4 Make adjustments to remedy faults and non-conformity to standard as required
3.5 Maintain continuity of process
3.6 Collect and reprocess/discard scrap/trim and other materials in accordance with procedures
3.7 Clean, adjust and lubricate equipment as required
3.8 Pause or stop equipment in an emergency, following workplace and emergency procedures

4 Anticipate and solve problems

4.1 Recognise a problem or a potential problem
4.2 Determine problems needing priority action
4.3 Refer problems outside area of responsibility to appropriate person, with possible causes
4.4 Seek information and assistance as required to solve problems
4.5 Solve problems within area of responsibility
4.6 Follow through items initiated until final resolution has occurred

No information

Replaces

State Code	National Code	Title	Type
W7645	PMBPROD333B	Convert plastic film	Unit of competency

State Code	National Code	Title	Type
BCT3	PMB30116	Certificate III in Polymer Processing	Qualification
BCU0	PMB40116	Certificate IV in Polymer Technology	Qualification