Unit of competency Outline

Date retreived
22/07/2026 7:35 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Maintain hydro turbines

Maintain hydro turbines

Unit of competency
National Code
UEPMNT314
State Code
OAI18
TGA Status
Current
DTWD Status
Pending
Current Release Number
1.00
Current Release Date
31/10/2018
View on TGA
State Implementation and Classification
Approved Date
Field of Education
030717 - Plant And Machine Operations
Original Release Date
Nominal Hours
Description
This unit involves the skills and knowledge required to maintain hydro turbines including their removal from service and the completion of overhauls. An overhaul includes a thorough examination of the hydro turbine, with repairs or changes made, if required. This may mean taking apart the hydro turbine to examine and repair it.Competency in this unit requires the ability to plan work, disassemble a hydro turbine, inspect a hydro turbine's components, repair a hydro turbine and/or its' components and to report on all completed work tasks. Individuals will, in general, work under supervision in an electrical, electronic and/or mechanical equipment repair workshop or onsite. Power generation maintenance personnel are typically trained and authorised to receive permits to work.No licensing, legislative or certification requirements apply to this unit at the time of publication.Note: Workplace practiceThe application of the skills and knowledge described in this unit of competency may require a licence or training permit to practice in the workplace, where work is carried out on gas and electrical installations. Additional and/or other conditions may apply under state and territory legislative and regulatory licensing requirements.
Notes
Elements and Performance Criteria
1 Plan and prepare for work
  • 1.1 Requirements including scope of work and assigned roles are identified and confirmed with appropriate personnel or by site inspection, in accordance with workplace procedures
  • 1.2 Work, Health and Safety (WHS)/Occupational Health and Safety (OHS) regulations, legislative requirements, industry standards, codes of practice, manufacturers’ specifications, environmental obligations and workplace procedures are reviewed in preparation for work
  • 1.3 Resources are obtained and inspected for compliance with job specifications
  • 1.4 Relevant plans, drawings and manuals are selected and interpreted, in accordance with workplace procedures
  • 1.5 Correct materials and components for work are obtained and inspected, in accordance with workplace procedures, for compliance with job specifications
  • 1.6 Work is planned, sequenced and prioritised, in accordance with workplace procedures
  • 1.7 Potential hazards are identified, and risk control measures are selected and implemented, in accordance with workplace procedures
  • 1.8 Work area is prepared, in accordance with workplace procedures
2 Disassemble hydroturbine
  • 2.1 Isolations are confirmed, where appropriate, in accordance with workplace procedures
  • 2.2 Hydro turbine is disassembled, in accordance with workplace procedures and manufacturers' specifications
  • 2.3 Hydro turbine components are removed in order of priority, in accordance with workplace procedures and manufacturers' specifications
  • 2.4 Disassembly is carried out to facilitate reassembly, in accordance with workplace procedures
  • 2.5 Components are measured, and clearances are taken, to determine conformity to manufacturers' limits, and to ensure assembly is in accordance with manufacturers' specifications
  • 2.6 Measurements and clearances are recorded, in accordance with workplace procedures and manufacturers' specifications
3 Inspecthydro turbine components
  • 3.1 Components are cleaned and inspected, in accordance with workplace procedures
  • 3.2 Faults are identified and recorded, in accordance with workplace procedures
  • 3.3 New components are inspected for compliance to manufacturers' specifications and hydro turbine requirements
  • 3.4 Components are prepared for assembly, in accordance with workplace procedures
4 Repair hydroturbine andcomponents
  • 4.1 Repairs are carried out, in accordance with workplace procedures
  • 4.2 Repairs are tested, and results analysed, to ensure conformance to manufacturers' specifications, in accordance with workplace procedures
  • 4.3 Data from testing is recorded, in accordance with workplace procedures
5 Complete work
  • 5.1 Work is completed, and appropriate personnel are notified, in accordance with workplace procedures
  • 5.2 Work area is cleared of waste, cleaned, restored and secured, in accordance with workplace procedures
  • 5.3 Tools and equipment are cleaned, maintained and stored, in accordance with workplace procedures
  • 5.4 Work completion details are finalised, in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
WE238 UEPMNT314B Maintain hydro turbines Unit of competency