Unit of competency Outline

Date retreived
23/07/2026 10:34 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Install or replace truss members

Install or replace truss members

Unit of competency
National Code
RIICTB308E
State Code
OCY42
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
25/01/2021
View on TGA
State Implementation and Classification
Approved Date
18/06/2021
Field of Education
030901 - Construction Engineering
Original Release Date
18/06/2021
Nominal Hours
30
Description
This unit describes the skills and knowledge required to install or replace truss members in civil construction including removing defective truss members, fabricating, installing and re-cambering replacement truss members and applying durability treatments.It applies to those working in operational roles. They generally work under minimal supervision to undertake a broad range of tasks in varied work contexts, using some discretion and judgement in selecting equipment, services or contingency measures.Licensing, legislative and certification requirements that apply to this unit can vary between states, territories, and industry sectors. Users must check requirements with relevant body before applying the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare to install or replace truss members
  • 1.1 Obtain, interpret and confirm work instructions
  • 1.2 Access, interpret and apply documentation required to install or replace truss members and confirm work activity is compliant
  • 1.3 Obtain and interpret emergency procedures, and identify steps required to respond to emergencies
  • 1.4 Select and wear personal protective equipment according to site requirements
  • 1.5 Confirm and identify requirements for complying with environmental protection, safety and traffic management signage requirements
  • 1.6 Identify, address and report environmental issues, potential hazards and risks
  • 1.7 Select plant, tools and equipment required to carry out tasks and check for faults
  • 1.8 Identify, confirm, and locate materials required for work application
2. Produce and install truss members
  • 2.1 Remove defective truss members according to job requirements
  • 2.2 Measure truss members and prepare for installation according to job requirements
  • 2.3 Fabricate new truss members to replace original truss members
  • 2.4 Fit new truss members according to job requirements
  • 2.5 Apply durability treatments to new truss members
  • 2.6 Install connectors and flashing to new truss members according to job requirements
  • 2.7 Adjust king bolts and re-camber truss according to job requirements
  • 2.8 Remove bailey supports once new truss members are secured
3. Conduct clean-up activities
  • 3.1 Clear work area and dispose of or recycle materials according to site requirements
  • 3.2 Clean, check, perform maintenance on and store machinery, tools and equipment according to manufacturer specifications and site requirements
No information
No information
Replaces
State Code National Code Title Type
WH172 RIICTB308D Install or replace truss members Unit of competency
State Code National Code Title Type
BGL0 RII30920 Certificate III in Civil Construction Qualification