Unit of competency Outline
Date retreived
23/07/2026 10:17 AM AWST
23/07/2026 10:17 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Maintain instrumentation system components
Maintain instrumentation system components
Unit of competency
National Code
MEM18064B
MEM18064B
State Code
W5611
W5611
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
State Implementation and Classification
Approved Date
26/10/2006
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Original Release Date
26/10/2006
Nominal Hours
54
Description
This unit covers maintaining instrument system components of a primarily mechanical nature. An understanding of instrumentation principles is required.
Notes
Elements and Performance Criteria
1. Check instrumentation system components
- 1.1. System components are identified correctly.
- 1.2. The characteristics and operational function of each system component are understood.
- 1.3. The operational function of each component is inspected and tested in accordance with standard operating procedures.
- 1.4. Operation of each component is assessed against specifications.
2. Identify, repair/replace faulty instrumentation system components
- 2.1. Faulty system components are localised/isolated and the malfunction is confirmed by inspection and testing using instrumentation principles, procedures and safety requirements.
- 2.2. Faulty system components are dismantled and repaired according to manufacturers'/site specifications and in accordance with standard operating procedures.
- 2.3. Replacement parts are selected from manufacturer catalogues and listings to required specifications.
- 2.4. System components are reassembled and tested for correct operation and assessment against specifications and in accordance with standard operating procedures.
- 2.5. Correct operation of the instrumentation system is confirmed according to standard operating procedures.
- 2.6. Appropriate follow-up procedures are adopted according to standard operating procedures.
- 2.7. Where appropriate, service reports are completed according to standard operating procedures.
RANGE STATEMENT
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Components
Include sensors, transmitters, converters, indicators, analysers, controllers, transducers, power supplies, removable circuit boards and sensor units associated with determining/controlling density, level, flow, temperature, composition etc. of a range of materials
The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Components
Include sensors, transmitters, converters, indicators, analysers, controllers, transducers, power supplies, removable circuit boards and sensor units associated with determining/controlling density, level, flow, temperature, composition etc. of a range of materials
EVIDENCE GUIDE
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to maintain instrumentation system components. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with maintaining instrumentation system components, or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria, required skills and knowledge, range statement and the Assessment Guidelines for the Training Package.
Overview of assessment
A person who demonstrates competency in this unit must be able to maintain instrumentation system components. Competency in this unit cannot be claimed until all prerequisites have been satisfied.
Critical aspects for assessment and evidence required to demonstrate competency in this unit
Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria, including required knowledge, and be capable of applying the competency in new and different situations and contexts.
Context of and specific resources for assessment
This unit may be assessed on the job, off the job or a combination of both on and off the job. Where assessment occurs off the job, that is the candidate is not in productive work, then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations. The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team. The assessment environment should not disadvantage the candidate.
This unit could be assessed in conjunction with any other units addressing the safety, quality, communication, materials handling, recording and reporting associated with maintaining instrumentation system components, or other units requiring the exercise of the skills and knowledge covered by this unit.
Method of assessment
Assessors should gather a range of evidence that is valid, sufficient, current and authentic. Evidence can be gathered through a variety of ways including direct observation, supervisor's reports, project work, samples and questioning. Questioning techniques should not require language, literacy and numeracy skills beyond those required in this unit. The candidate must have access to all tools, equipment, materials and documentation required. The candidate must be permitted to refer to any relevant workplace procedures, product and manufacturing specifications, codes, standards, manuals and reference materials.
Guidance information for assessment
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| M1486 | MEM18.64AA | Maintain instrumentation system components | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| OAU53 | MEM18064 | Maintain instrumentation system components | Unit of competency |
| State Code | National Code | Title | Type |
|---|---|---|---|
| W245 | MEM40105 | Certificate IV in Engineering | Qualification |
| W247 | MEM50105 | Diploma of Engineering - Advanced Trade | Qualification |
| W239 | MEM30405 | Certificate III in Engineering - Electrical/Electronic Trade | Qualification |
| W237 | MEM30205 | Certificate III in Engineering - Mechanical Trade | Qualification |
| W726 | LMT31909 | Certificate III in Engineering - TCF Mechanic | Qualification |