Unit of competency Outline

Date retreived
23/07/2026 3:35 AM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Carry out hull repairs

Carry out hull repairs

Unit of competency
National Code
AURR346108B
State Code
D7659
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
1.00
Current Release Date
21/06/2011
View on TGA
State Implementation and Classification
Approved Date
12/10/2011
Field of Education
031703 - Marine Construction
Original Release Date
12/10/2011
Nominal Hours
30
Description
This unit of competency describes the skills and knowledge required to inspect the hull of a vessel for deterioration and damage and complete repairs using approved methods, materials and equipment.It requires the ability to identify and confirm work requirements, inspect and repair the hull of a vessel and complete work finalisation processes.No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1. Prepare for work
  • 1.1. Confirm nature and scope of work to be carried out
  • 1.2. Locate occupational health and safety (OHS) and workplace environmental and sustainable procedures and practices, applicable to the work
  • 1.3. Access and interpret repair method, workshop manuals and manufacturer information
  • 1.4. Check and prepare tools, equipment and materials
  • 1.5. Set up work area
2. Inspect hull deterioration and damage and complete repairs
  • 2.1. Inspect hull and identify deterioration and damage
  • 2.2. Carry out repairs in accordance with vessel manufacturer and component specifications, and OHS and workplace environmental and sustainable procedures and practices
  • 2.3. Test repairs, make required adjustments and re-test
  • 2.4. Determine the need for water testing
3. Clean up work area and maintain equipment
  • 3.1. Clean and inspect equipment and tooling according to workplace requirements
  • 3.2. Tag unserviceable equipment and faults identified in accordance with workplace requirements
  • 3.3. Clean work area, dispose of waste and scrap, and store tools and equipment in accordance with workplace procedures
  • 3.4. Finalise and process work completion documentation and give to appropriate persons, as required
No information
No information
Replaces
State Code National Code Title Type
W2941 AURR346108A Carry out hull repairs Unit of competency
Replaced By
State Code National Code Title Type
WF316 AURRTA3002 Carry out hull repairs Unit of competency
State Code National Code Title Type
D541 AUR30511 Certificate III in Marine Qualification