Unit of competency Outline

Date retreived
22/07/2026 7:43 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Perform risk analysis of generation plant

Perform risk analysis of generation plant

Unit of competency
National Code
UEPOPS123
State Code
ODY60
TGA Status
Current
DTWD Status
Approved
Current Release Number
1.00
Current Release Date
20/04/2022
View on TGA
State Implementation and Classification
Approved Date
14/04/2023
Field of Education
031311 - Powerline Installation And Maintenance
Original Release Date
14/04/2023
Nominal Hours
18
Description
This unit involves the skills and knowledge required to identify and analyse risks in the loss of power generation and production plant.Risk analysisidentifies dangers posed by potential natural or human caused adverse events. Once risks have been identified, they must be assessed as to potential impact and the probability of occurrence.Competency in this unit requires the ability to identify risks; conduct analysis; produce, implement and monitor recommendations; and complete documentation. Individuals will, in general, work under supervision, in a power generation facility as an operator. Power generation plant operators are trained and authorised to isolate, prepare plant and issue permits to work.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Notes
Elements and Performance Criteria
1 Identify risk
  • 1.1 Power generation plant maintenance and operational procedures are obtained in accordance with workplace procedures
  • 1.2 Power generation plant operating and maintenance history, including incident and failure reports, is obtained in accordance with workplace procedures
  • 1.3 Work health and safety (WHS)/occupational health and safety (OHS) regulations, legislative requirements, codes of practice, manufacturers’ recommendations and specifications, environmental requirements and workplace procedures are identified, applied and monitored
  • 1.4 Power generation plant technical documentation is obtained in accordance with workplace procedures
  • 1.5 Risk analysis objectives for power generation plant are defined in accordance with workplace procedures
2 Conduct analysis
  • 2.1 Risk analysis is completed using methodology in accordance with workplace procedures
  • 2.2 Power generation plant incident scenarios are identified and consequences analysed and prioritised for risk in accordance with workplace procedures
  • 2.3 Objectives identified during risk analysis for power generation plant risk scenarios are recorded in accordance with workplace procedures
3 Produce, implementandmonitor recommendations
  • 3.1 Recommendations for risk preventative actions are produced against each power generation plant risk scenario in accordance with workplace procedures
  • 3.2 Implementation of recommendations for risk controls are monitored in accordance with workplace procedures
4 Complete documentation
  • 4.1 Risk analysis recommendations are documented in accordance with workplace procedures
  • 4.2 Risk analysis report is produced and submitted in accordance with workplace procedures
No information
No information
Replaces
State Code National Code Title Type
OAG51 UEPOPS414 Perform risk analysis of generation plant Unit of competency
State Code National Code Title Type
BHQ2 UEP40122 Certificate IV in ESI Generation Qualification
BHP9 UEP50122 Diploma of ESI Generation Qualification