Unit of competency Outline

Date retreived
22/07/2026 10:25 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Construct underpinning

Construct underpinning

Unit of competency
National Code
RIICFW301D
State Code
WH092
TGA Status
Replaced
DTWD Status
Replaced
Current Release Number
2.00
Current Release Date
07/12/2014
View on TGA
State Implementation and Classification
Approved Date
29/05/2014
Field of Education
030903 - Structural Engineering
Original Release Date
29/05/2014
Nominal Hours
52
Description
This unit describes a participant’s skills and knowledge required to construct underpinning in Civil Construction.This unit is appropriate for those working in operational roles. Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and Industry sectors. Relevant information must be sourced prior to application of the unit.
Notes
Elements and Performance Criteria
1. Plan and prepare
  • 1.1 Access, interpret and apply construct underpinning documentation and ensure the work activity is compliant
  • 1.2 Obtain, interpret, clarify and confirm work instructions before proceeding
  • 1.3 Confirm and apply environmental protection and safety requirements
  • 1.4 Obtain, interpret and implement traffic management signage requirements
  • 1.5 Select and check for faults tools and equipment to carry out tasks
  • 1.6 Select and wear correct personal protective equipment appropriate for work activities
  • 1.7 Identify, address and report hazards, risks and environmental issues
  • 1.8 Obtain and interpret emergency procedures, and be prepared for fire/accident/emergency
2. Set out and prepare sections
  • 2.1 Confirm and apply setout requirements
  • 2.2 Identify and record underpinning requirements for adjoining properties and roadways
  • 2.3 Identify and implement sections and sequence of excavations
  • 2.4 Check existing shoring system for soundness
  • 2.5 Set out sections for excavation
  • 2.6 Identify and protect areas for excavation and surrounding working space requirements
  • 2.7 Erect barricades and signage
  • 2.8 Position plant and equipment for excavations
3. Excavate sections
  • 3.1 Excavate designated sections to the designed depth of footings
  • 3.2 Install trench and excavation support
4. Construct underpinning
  • 4.1 Construct underpinning
  • 4.2 Backfill excavated sections
  • 4.3 Underpin alternate sections in sequence
5. Clean up
  • 5.1 Clear work area and dispose of or recycle materials
  • 5.2 Clean, check, maintain and store plant, tools and equipment
No information
No information
Replaces
State Code National Code Title Type
WB602 RIICFW301A Construct underpinning Unit of competency
Replaced By
State Code National Code Title Type
OCY32 RIICFW301E Construct underpinning Unit of competency